Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030555BTC
In stock
DELL
DELL 1.92TB SATA Enterprise SSD SE5031 GKTF1
1.92 TB SATA enterprise SSD built for mixed-use workloads in 2.5-inch Dell PowerEdge servers
- InterfaceSATA
- 92 TB capacity supports large enterprise workloads
- SATA 6 Gbps interface integrates with existing server storage
- Mixed-use TLC flash balances read and write endurance
- 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
- Tested components with updated firmware ensure reliable deployment
Dell SE5031 Enterprise SATA SSD
This Dell SE5031 drive provides 1.92TB of capacity over a 6Gbps SATA interface. It uses mixed-use TLC flash in a 7mm 2.5-inch form factor. The drive targets servers and storage arrays that need reliable read/write performance for databases, virtualization or general-purpose workloads. Firmware is updated and each unit is tested before shipment.
Sustained mixed-use endurance
Mixed-use TLC architecture balances read and write cycles so the drive maintains steady throughput under continuous database or virtualization loads. Enterprise-grade firmware manages wear levelling and power-loss protection to prevent performance drops during extended write sequences. The SATA 6Gbps link delivers consistent bandwidth without the thermal throttling seen in smaller form factors.
Upgrade path for legacy SATA bays
This SSD replaces mechanical 2.5-inch drives or lower-capacity SATA SSDs in compatible PowerEdge servers. The jump is worthwhile when latency-sensitive applications outgrow HDD random IOPS or when older SATA SSDs reach write-endurance limits. It fits existing 7mm drive bays and backplanes without caddy changes or controller upgrades.
Highlights
- 92 TB capacity supports large enterprise workloads
- SATA 6 Gbps interface integrates with existing server storage
- Mixed-use TLC flash balances read and write endurance
- 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
- Tested components with updated firmware ensure reliable deployment
Specifications
| Brand | Dell |
|---|---|
| Model | HFS1T9G32FEH-BA10A |
| Interface | SATA |
Questions about this item
How much heat and power does the 1.92TB SATA SSD draw when running continuously in a server?
The drive uses a standard SATA interface and 7 mm 2.5 inch form factor, so power and thermal output match typical enterprise SATA SSDs in that class.
What drive bay or adapter is needed to install this 2.5 inch 7 mm SATA SSD?
It fits any 2.5 inch SATA bay that accepts a 7 mm height drive; no extra adapter is required if the bay matches that size.
Will this SSD work in my older PowerEdge R740 alongside existing drives?
Yes, the drive is listed as compatible with the PowerEdge R740 and other servers in the same generation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
