暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Dell 1.92TB 2.5 inch SATA enterprise SSD SE5031 GKTF1

DELL

DELL 1.92TB SATA Enterprise SSD SE5031 GKTF1

SKU CH-E8PY-33RVY

1.92 TB SATA enterprise SSD built for mixed-use workloads in 2.5-inch Dell PowerEdge servers

  • InterfaceSATA
  • 92 TB capacity supports large enterprise workloads
  • SATA 6 Gbps interface integrates with existing server storage
  • Mixed-use TLC flash balances read and write endurance
  • 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
  • Tested components with updated firmware ensure reliable deployment

Dell SE5031 Enterprise SATA SSD

This Dell SE5031 drive provides 1.92TB of capacity over a 6Gbps SATA interface. It uses mixed-use TLC flash in a 7mm 2.5-inch form factor. The drive targets servers and storage arrays that need reliable read/write performance for databases, virtualization or general-purpose workloads. Firmware is updated and each unit is tested before shipment.

Sustained mixed-use endurance

Mixed-use TLC architecture balances read and write cycles so the drive maintains steady throughput under continuous database or virtualization loads. Enterprise-grade firmware manages wear levelling and power-loss protection to prevent performance drops during extended write sequences. The SATA 6Gbps link delivers consistent bandwidth without the thermal throttling seen in smaller form factors.

Upgrade path for legacy SATA bays

This SSD replaces mechanical 2.5-inch drives or lower-capacity SATA SSDs in compatible PowerEdge servers. The jump is worthwhile when latency-sensitive applications outgrow HDD random IOPS or when older SATA SSDs reach write-endurance limits. It fits existing 7mm drive bays and backplanes without caddy changes or controller upgrades.

特長

  • 92 TB capacity supports large enterprise workloads
  • SATA 6 Gbps interface integrates with existing server storage
  • Mixed-use TLC flash balances read and write endurance
  • 7 mm 2.5-inch form factor fits Dell PowerEdge drive bays
  • Tested components with updated firmware ensure reliable deployment

仕様

BrandDell
ModelHFS1T9G32FEH-BA10A
InterfaceSATA

この商品に関する質問

How much heat and power does the 1.92TB SATA SSD draw when running continuously in a server?

The drive uses a standard SATA interface and 7 mm 2.5 inch form factor, so power and thermal output match typical enterprise SATA SSDs in that class.

What drive bay or adapter is needed to install this 2.5 inch 7 mm SATA SSD?

It fits any 2.5 inch SATA bay that accepts a 7 mm height drive; no extra adapter is required if the bay matches that size.

Will this SSD work in my older PowerEdge R740 alongside existing drives?

Yes, the drive is listed as compatible with the PowerEdge R740 and other servers in the same generation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。