نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small square laptop CPU fan, black plastic housing, 3-pin connector visible

DELL

DELL CPU Cooling Fan FW007 Latitude XT 3-pin

SKU CH-G3YX-YW85R

Genuine Dell replacement CPU cooling fan for Latitude XT with 3-pin connector

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell Latitude XT
  • Dimensions3.15" (L) x 3.15" (W) x 0.4" (H)
  • Weight0.15 lbs
  • Genuine Dell part built for Latitude XT
  • 3-pin connector enables straightforward replacement
  • Efficient heat dissipation keeps system stable
  • Quiet operation suits mobile work environments
  • Compact 3.15" x 3.15" x .4" design fits chassis precisely

Genuine Dell replacement fan for Latitude XT

This OEM CPU cooling fan carries part number FW007 and is built specifically for the Dell Latitude XT laptop. It uses a 3-pin connector that matches the original motherboard header. The unit is new and intended as a direct swap for a worn or failed cooler. Installers should verify the exact model label before fitting.

Thermals noise and power in normal use

The fan is engineered for efficient heat dissipation and quiet operation under typical workloads. Its 3-pin design allows the system to regulate speed based on temperature, keeping acoustic output low during everyday tasks. No independent power draw or noise figures are supplied by the manufacturer. Long-term stability relies on the original thermal design of the Latitude XT chassis.

What the bundled connector and fit change

The precision 3-pin connector ensures a secure electrical and mechanical match without adapters. OEM dimensions of 3.15 by 3.15 by .4 inches and a weight of .15 lbs mean the fan seats exactly in the factory mounting points. This eliminates cable routing issues and restores the intended airflow path. No additional brackets, screws or software are included in the package.

أبرز المميزات

  • Genuine Dell part built for Latitude XT
  • 3-pin connector enables straightforward replacement
  • Efficient heat dissipation keeps system stable
  • Quiet operation suits mobile work environments
  • Compact 3.15" x 3.15" x .4" design fits chassis precisely

المواصفات

BrandDell
Part NumberFW007
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell Latitude XT
Dimensions3.15" (L) x 3.15" (W) x 0.4" (H)
Weight0.15 lbs

أسئلة حول هذا المنتج

How do I install the FW007 CPU cooling fan in a Dell Latitude XT, and what step is most often done incorrectly?

Remove the bottom cover, disconnect the old 3-pin connector, unscrew the fan assembly, fit the new unit, reconnect the 3-pin plug, then replace the cover. The step most often missed is fully seating the 3-pin connector so the fan spins and reports speed to the BIOS.

What maintenance or replacement will the FW007 fan need over time?

Dust buildup on the blades and heatsink fins reduces airflow; clean with compressed air every few months. If bearing noise appears or the fan stops spinning, replace the entire FW007 unit — it is a single field-replaceable part with no separate serviceable components.

What limit appears first when the Latitude XT runs sustained heavy loads with this fan?

The fan’s fixed 3-pin speed curve and compact 3.15" x 3.15" x 0.4" frame cap maximum airflow, so thermal throttling of the CPU occurs before the fan itself reaches any mechanical limit.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.