نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with Mini PCIe edge connector, 20-pin USB 3.0 header and SATA power socket

EN-Labs

EN-Labs 11-001-241 Mini PCIe to Dual USB 3.0 20-pin Expansion Card

SKU CH-PZA1-F7B1M

Adds two internal USB 3.0 headers through a mini PCIe slot using a NEC UPD720202 chipset and SATA power

  • SpecificationsMain chip: NEC UPD720202 chipset Have unused mini PCIe slot
  • FeaturesThis product is an ideal choice for any Mini PCI-Express exp
  • Package Contents1 Piece Mini PCI-e to USB Expantion Card 1 Piece CD Driver
  • Adds two USB 3.0 ports via a Mini PCIe slot
  • Up to 5 Gbps transfer speed with NEC UPD720202 chipset
  • Powered by SATA 15-pin connector from the PSU
  • Backwards compatible with USB 2.0, 1.1 and 1.0 devices
  • Supports hot-swap and Windows XP through Linux drivers

Mini PCIe to Dual USB 3.0 Adapter

This expansion card converts a spare Mini PCI Express slot into two internal USB 3.0 ports using a 20-pin motherboard header. It targets embedded or micro systems that need extra high-speed USB connectivity without occupying a full-size PCIe slot. The NEC UPD720202 chipset handles the protocol conversion and supports the USB 3.0 5Gbps transfer rate.

Check Mini PCIe Slot and Power Headers

Verify the motherboard has an available Mini PCIe slot and confirm it is not an mSATA-only interface, as the card will not function in that configuration. Ensure the power supply provides a free SATA 15-pin connector to deliver the required 5V power, because the Mini PCIe slot itself does not supply that voltage. A driver CD is included for Windows XP, Vista, 7, 8, 2003 and Linux operating systems.

Adds Two Internal USB 3.0 Ports

The card outputs a single 20-pin header, also referred to as 19-pin, which connects to the motherboard's internal USB 3.0 header for two Type-A ports. It draws auxiliary power from the SATA 15-pin cable, leaving the Mini PCIe lane free for data only. Hot-swap capability is supported, and the xHCI 1.0 controller maintains backward compatibility with USB 2.0, 1.1 and 1.0 devices.

أبرز المميزات

  • Adds two USB 3.0 ports via a Mini PCIe slot
  • Up to 5 Gbps transfer speed with NEC UPD720202 chipset
  • Powered by SATA 15-pin connector from the PSU
  • Backwards compatible with USB 2.0, 1.1 and 1.0 devices
  • Supports hot-swap and Windows XP through Linux drivers

المواصفات

BrandEn-Labs
Model11-001-241
SpecificationsMain chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
SATA to take power by the board, or you can into a small Molex 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed
FeaturesThis product is an ideal choice for any Mini PCI-Express expansible embedded or micro system needing larger volume and higher speed data transfer connectivity with USB devices. Real world applications such as: Connect to external hard disk drive, fast Solid State Drive(SSD), optical driver, high definition video camera etc.
Package Contents1 Piece Mini PCI-e to USB Expantion Card
1 Piece CD Driver

أسئلة حول هذا المنتج

What comes in the box and do I need any extra cables?

The box contains the Mini PCIe to USB 3.0 expansion card and a driver CD. You must supply a SATA 15-pin power cable from your PSU; the card draws power through that connector.

Which header on my motherboard does the 20-pin connector fit?

The card outputs a USB 3.0 internal 20-pin header, which is the same physical header sometimes labelled 19-pin on motherboards. It provides two USB 3.0 ports from one Mini PCIe slot.

What real-world speed can I expect from the 5 Gbps rating once the card is installed?

The NEC UPD720202 chipset delivers up to 5 Gbps theoretical bandwidth per port, backward compatible with USB 2.0 at 480 Mbps and USB 1.1/1.0. Actual throughput depends on the connected device and system load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.