Flashforge
Flashforge AD5X 3D Printer 600mm/s Multi-Color CoreXY 300°C Nozzle
Multi-color CoreXY 3D printer with 300°C nozzle, 600mm/s max speed, full-auto leveling, 4kg auto filament refill, and 32mm³/s flow reaching 200°C in 35s
- Color4
- Number of Extruders1
- Body MaterialMetal
- TechnologyFDM (Fused Deposition Modeling)
- Build MaterialPLA
- Build Size220*220*220mm
- Multi-color printing via IFS with single 300°C nozzle
- Ready to print in 10 minutes with full-auto leveling
- CoreXY frame reaches 600mm/s speed and 20000mm/s² acceleration
- 50W hot-end heats to 200°C in 35 seconds for fast starts
- Flexible PEI steel plate and quick-release nozzle simplify part removal
Multi-color CoreXY printer for makers
The Flashforge AD5X is a CoreXY 3D printer with an Intelligent Filament System that enables four-color printing through a single 0.4mm nozzle. It ships largely assembled and reaches a print-ready state in roughly 10 minutes after unboxing. The 300°C nozzle temperature extends material compatibility beyond standard PLA. Full-auto leveling removes manual calibration from the workflow.
Sustained high-speed printing behavior
A maximum travel speed of 600mm/s and 20,000mm/s² acceleration keep multi-color jobs moving without long pauses between tool changes. The 50W heater brings the nozzle to 200°C in about 35 seconds, while a 32mm³/s volumetric flow rate supports the motion system at speed. An automatic 4kg filament refill reduces the frequency of mid-print material swaps on large builds. Resume-after-power-loss protects progress during extended sessions.
Compatibility checks before ordering
Verify that your slicing workflow can use Orca-Flashforge or the Flash Maker mobile app for job preparation and monitoring. Confirm the 220mm cubic build volume suits the parts you intend to produce. Ensure your environment can accommodate the 8.7-inch frame dimensions and that 1.75mm filament spools are available for the materials you plan to print. Check that USB, Wi-Fi or Ethernet connectivity matches your network setup.
أبرز المميزات
- Multi-color printing via IFS with single 300°C nozzle
- Ready to print in 10 minutes with full-auto leveling
- CoreXY frame reaches 600mm/s speed and 20000mm/s² acceleration
- 50W hot-end heats to 200°C in 35 seconds for fast starts
- Flexible PEI steel plate and quick-release nozzle simplify part removal
المواصفات
| Brand | FlashForge |
|---|---|
| Series | AD5 |
| Model | AD5X |
| Part Number | AD5X |
| Color | 4 |
| Number of Extruders | 1 |
| Body Material | Metal |
| Technology | FDM (Fused Deposition Modeling) |
| Build Material | PLA |
| Build Size | 220*220*220mm |
| Layer Thickness | 100 microns |
| Print Jets | Single Jet |
| Filament Diameter | 1.75mm |
| Jets Diameter | 0.4mm |
| Max Working Speed | 600mm/s |
| Connectivity | USB/WIFI/Ethernet |
| Software Bundle | Flash Studio |
أسئلة حول هذا المنتج
How loud or hot does the CoreXY frame get when printing at 600mm/s all day?
The CoreXY structure and 50W heater reaching 200°C in 35 seconds keep multi-color jobs fast and stable, while automatic 4kg filament refill reduces mid-print swaps.
What must I already own — filament, slicer, or app — to start printing in 10 minutes?
It works with 1.75mm PLA out of the box, includes Flash Studio software, and supports Orca-Flashforge slicer plus the Flash Maker mobile app for monitoring.
Will the 300°C nozzle and PEI plate work with my existing 0.4mm nozzles and 220mm build plates?
Four nozzle sizes are available including 0.4mm, the quick-release nozzle fits the 300°C hotend, and the flexible PEI steel plate matches the 220×220×220mm build volume.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
