Geometric Future Eskimo Pro 420mm liquid cooler Black GEO-EP-42B
- Liquid Cooling Syst…
- Intel® LGA 1700, AM…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Geometric Future
360 mm AIO with three 120 mm ARGB Squama 2501 fans, 1.5 L/min K6 pump and 55.8 mm copper base for LGA 1700 and AM5
Model Eskimo Pro 360
Fan Size 3 Fan Slots / 120x25mm
Color White
The Geometric Future Eskimo Pro is a new all-in-one CPU cooler with a 360 mm radiator and three pre-installed 120 mm ARGB PWM fans. A copper cold plate measuring 55.8 by 55.8 mm sits above an integrated K6 pump rated at 1.5 L/min flow. The white finish and diffused ARGB lighting on the block and fans suit colour-coordinated builds.
This cooler fits current mainstream desktop sockets from both manufacturers. Systems that require a different mounting pattern or a smaller radiator will not be compatible. Users who prefer air cooling or need a thinner radiator for space-constrained cases should consider other form factors.
The radiator width determines case clearance and the fan count sets the maximum airflow potential. The bundled Squama 2501 ARGB fans are optimised for static pressure across the 360 mm core. Verify that your chassis supports a 360 mm mount before purchasing.
| Type | Liquid Cooling System |
|---|---|
| Block Compatibility | Intel® LGA 1700, AMD®AM5 |
| Block Material | Copper |
| Fan Size | 3 Fan Slots (120 mm) |
| Color | White |
| LED Color | ARGB |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 360 mm radiator occupies three 120 mm fan slots, so the case must support a 360 mm top, front or rear mounting position with enough depth for the radiator plus 25 mm fan thickness and tubing clearance.
Use the included socket-specific bracket kit, apply thermal paste, place the copper base on the CPU, then secure the four thumb-screws in a cross pattern; the step often missed is removing the protective film from the copper base before installation.
Replace the fans if bearing noise appears, airflow drops noticeably, or ARGB lighting fails — typically after several years of continuous operation; the pump is rated for a 1.5 L/min flow rate and does not have a user-service interval.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟