نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
A rectangular silver ATX power supply with a single fan and multiple cable connectors

Gulfe

Gulfe ATX power supply for HP Pavilion Elite M9080N M9105Z

SKU CH-MZ59-3ZN36

ATX power supply with reduced depth, 24-pin and 4-pin CPU connectors, three SATA and two LP4 plugs, 115/230 V input and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

Replacement ATX PSU for HP Pavilion Elite

This Gulfe ATX power supply replaces the original unit in HP Pavilion Elite M9080N and M9105Z desktops. It delivers the standard output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. A single fan cools the unit which weighs 2.5 and measures 5.9" Height x 3.4" Width. It is a new component supplied for legacy system maintenance.

Upgrades legacy OEM units with reduced depth

The reduced depth design increases compatibility inside compact HP chassis where standard-length units may not fit. It replaces several older legacy power supplies that lack modern protection features. Over current and over power protection safeguard connected hardware. The jump is worth it when the original PSU fails or shows instability under load.

ATX connector layout limits expansion

Connectors provided are one ATX 24 (20+4) pin, one P4 12V 4 pin, three SATA 15 pin, two LP4 4 pin and one floppy 4 pin. No PCIe power connectors are present so discrete graphics cards requiring external power cannot be supported. Builders needing more SATA devices or modern GPU power must look elsewhere. The fixed cable set defines the practical device limit.

أبرز المميزات

  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

المواصفات

BrandGulfe
TypeATX
Fans1
Weight2.5

أسئلة حول هذا المنتج

What are the exact dimensions I need to clear in my HP Pavilion Elite M9080N case?

The unit measures 5.9 inches high by 3.4 inches wide with a reduced depth design for increased compatibility in the M9080N and M9105Z chassis.

Which power connectors must I attach to the motherboard and drives during installation?

Connect the 24-pin ATX (20+4) main plug, the P4 4-pin CPU cable, three SATA 15-pin leads for drives, two LP4 4-pin peripherals and the floppy 4-pin if required.

When should I plan to replace the internal cooling fan?

The single built-in fan is the only moving part; replace it when bearing noise appears or airflow drops, typically after several years of continuous operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.