暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Gulfe

Gulfe ATX power supply for HP Pavilion Elite M9080N M9105Z

SKU CH-MZ59-3ZN36

ATX power supply with reduced depth, 24-pin and 4-pin CPU connectors, three SATA and two LP4 plugs, 115/230 V input and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

Replacement ATX PSU for HP Pavilion Elite

This Gulfe ATX power supply replaces the original unit in HP Pavilion Elite M9080N and M9105Z desktops. It delivers the standard output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. A single fan cools the unit which weighs 2.5 and measures 5.9" Height x 3.4" Width. It is a new component supplied for legacy system maintenance.

Upgrades legacy OEM units with reduced depth

The reduced depth design increases compatibility inside compact HP chassis where standard-length units may not fit. It replaces several older legacy power supplies that lack modern protection features. Over current and over power protection safeguard connected hardware. The jump is worth it when the original PSU fails or shows instability under load.

ATX connector layout limits expansion

Connectors provided are one ATX 24 (20+4) pin, one P4 12V 4 pin, three SATA 15 pin, two LP4 4 pin and one floppy 4 pin. No PCIe power connectors are present so discrete graphics cards requiring external power cannot be supported. Builders needing more SATA devices or modern GPU power must look elsewhere. The fixed cable set defines the practical device limit.

特長

  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

仕様

BrandGulfe
TypeATX
Fans1
Weight2.5

この商品に関する質問

What are the exact dimensions I need to clear in my HP Pavilion Elite M9080N case?

The unit measures 5.9 inches high by 3.4 inches wide with a reduced depth design for increased compatibility in the M9080N and M9105Z chassis.

Which power connectors must I attach to the motherboard and drives during installation?

Connect the 24-pin ATX (20+4) main plug, the P4 4-pin CPU cable, three SATA 15-pin leads for drives, two LP4 4-pin peripherals and the floppy 4-pin if required.

When should I plan to replace the internal cooling fan?

The single built-in fan is the only moving part; replace it when bearing noise appears or airflow drops, typically after several years of continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。