OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
HUANANZHI
Dual-socket E-ATX board for two Xeon CPUs with sixteen DDR3 slots, multiple PCIe x16 and x8 lanes, dual Gigabit Ethernet and on-board VGA
The HUANANZHI X79 16D is an E-ATX motherboard built for dual Intel Xeon processors in LGA 2011 sockets. It targets builders assembling high-core-count workstations or render nodes that need massive memory capacity in a single chassis. The 12-layer PCB and 7+7 phase power delivery are engineered for sustained multi-socket loads.
Sixteen DDR3 DIMM slots support registered ECC, non-ECC or standard ECC modules at 1866, 1600, 1333 or 1066 MHz. Dual-channel architecture means memory must be populated in matched pairs per processor to reach rated bandwidth. Maximum supported capacity is 16 x 32 GB.
The board comfortably handles workloads that scale with core count and memory footprint such as virtualization hosts, offline rendering or scientific computing. It runs out of modern I/O headroom with only two SATA 3.0 ports, a single USB 3.0 header and PCIe 3.0 as the fastest expansion link.
| Brand | HUANANZHI |
|---|---|
| CPU Socket Type | Dual LGA 2011 |
| CPU Type | Dual Intel Xeon |
| Number of Processor Support | 2 |
| DDR Standard | DDR 333 (PC 2700) |
| DDR3 Standard | DDR3 1866 |
| Channel Supported | Dual Channel |
| ECC Supported | Non-ECC |
| PCI Express 4.0 x16 | 1 |
| PCI Express 3.0 x16 | 3 |
| PCI Express 2.0 x16 | 3 |
| PCI Express x16 | 3 x PCI Express x16 |
| PCI Express x8 | 2 x PCI Express x8 |
| USB 1.1/2.0 | 2 x USB 2.0 |
| USB 3.0 | 1 x USB 3.0 |
| Dimensions (W x L) | 12.3" x 13.4" |
The board provides 16 DDR3 slots and each slot accepts modules up to 32 GB, allowing very large memory configurations when fully populated with compatible sticks
One PCI Express 4.0 x16 slot is present alongside three PCI Express 3.0 x16 and three PCI Express 2.0 x16 slots, so the fastest link runs at 4.0 speeds while the others operate at their respective generation limits
The board measures 305 mm by 330 mm and uses the E-ATX form factor, so it requires a chassis that explicitly supports E-ATX motherboards and has matching standoff positions
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟