ICY DOCK MB993SK-B ToughArmor 3 x 2.5" SAS SATA to 3.5" bay hdd accessory
- Black
- 1 x 2.5" Drive to 3…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
ICY DOCK
Holds one 2.5" U.2 NVMe, SAS or SATA drive in any external 3.5" bay and supports 32Gb/s transfer
Model ToughArmors NVMe 1BAY
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
Option 2-Bay 3.5"
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The ICY DOCK MB601VK-B adapts a single 2.5 inch U.2 NVMe SSD or SAS and SATA drive into a standard 3.5 inch external bay. It provides a direct connection for hot-swap capability without cables. The matte black tray fits floppy bay openings and supports 32Gb/s transfer rates for NVMe devices. A compatible U.2 host connection is required for all supported drive types.
The unit occupies one external 3.5 inch bay and secures with standard case screws. It eliminates internal drive cages and frees motherboard SATA ports when using NVMe drives. Power and data pass through the U.2 connector to the host backplane or adapter card. The enclosed tray protects the drive during transport and insertion.
This mobile rack suits professionals who move U.2 NVMe or enterprise SAS and SATA drives between workstations or servers. It is not for builders without a U.2 host interface or available 3.5 inch bay. Users needing M.2 drive support or multiple simultaneous drives should consider other solutions.
| Brand | ICY DOCK |
|---|---|
| Model | MB601VK-B |
| Color | Matte Black |
| Conversion Tray | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Interface | U.2 |
| Protection Case | Single Drive |
| Compatible Products | Drive Fit : NVMe SSD or SAS / SATA SSD/HDD NVMe U.2 host is required to accept NVMe, SAS or SATA drive |
| Specifications | Dimension (L x W x H): 161.2 x 101.2 x 25.4mm |
| Features | Fits 1 x 2.5” U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD (NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD) Fits any external 3.5" drive bay or floppy bay Supports NVMe 32Gb/s transfer rate Accommodates 2.5" SSD with 7mm, 9mm, 12.5mm & 15mm Height Active Power Technology (APT) - only powers up if there is drive installed in the drive bay Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs EMI Grounding - protects hard drives from electrical damage Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the en |
| وزن الشحنة | 0.46 kg |
| أبعاد الطرد | 185 × 112 × 38 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The tray supports NVMe at up to 32 Gb/s; actual sustained throughput depends on the drive and host controller, not the tray itself.
The aluminium body acts as a passive heatsink; no fan is included, so drive temperature will follow case airflow.
A U.2 NVMe host port is required; the tray passes the signal through without converting protocols.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟