نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black metal four-bay cage for 2.5 inch drives in a 5.25 inch bay

ICY DOCK

ICY DOCK MB607SP-B 4 bay 2.5" SATA hdd accessory

SKU CH-ARP9-916AE MPN MB607SP-B

Converts one 5.25" bay into four hot-swappable 2.5" SATA or SAS drive slots with a 40 mm fan and three speed modes

  • ColorBlack
  • Conversion Tray4 x 2.5" Drive to 5.25" Bay
  • Mobile Rack Drives Support4 x 2.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model ToughArmors 4BAY - Lite

عرض 4 تكوينات إضافية

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

Option 4-Bay (2.5in SATA/SAS)

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Holds four 2.5" SATA drives in one 5.25" bay
  • Full metal chassis meets medical and military rugged standards
  • Tool-free hot-swap lets you change drives without powering down
  • Three-speed 40 mm fan optimises cooling for SSD or HDD use
  • Single 15-pin SATA power connector cuts cable clutter

Four-bay 2.5" SATA cage for 5.25" bay

The ICY DOCK MB607SP-B fits four 2.5" SATA or SAS drives into one external half-height 5.25" bay. It is built for industrial PCs, medical and military systems that need rugged, hot-swap storage in a single front-access slot.

Holds four drives from 7 mm to 15 mm thick

Each bay accepts 2.5" SSDs or hard drives up to 15 mm height, delivering up to 6 Gb/s per drive depending on the drive itself. The single 40 mm fan offers three speed modes so cooling matches SSD or mechanical drive workloads.

Requires one 5.25" bay and four SATA ports

Installation needs a single external 5.25" bay, four 7-pin SATA data cables and one 15-pin SATA power connector. Systems without a free 5.25" bay or insufficient SATA connections cannot use this cage.

أبرز المميزات

  • Holds four 2.5" SATA drives in one 5.25" bay
  • Full metal chassis meets medical and military rugged standards
  • Tool-free hot-swap lets you change drives without powering down
  • Three-speed 40 mm fan optimises cooling for SSD or HDD use
  • Single 15-pin SATA power connector cuts cable clutter

المواصفات

BrandICY DOCK
ModelMB607SP-B
ColorBlack
Conversion Tray4 x 2.5" Drive to 5.25" Bay
Mobile Rack Drives Support4 x 2.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsHost Interface: 4 x 7pin SATA
Drive Fit: 4 x 2.5" SATA I / II / III SSD or hard drive
Device Fit: Single external half height 5.25" bay
Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed)
Power Input: 1 x 15pin SATA power port
Insert& Extract connection Via: Direct SATA hard drive connection
Structure: Metal
Drive Cooling: Singlel 40mm rear cooling fan + fan power switch, Metal heat dispersion
Power Indicator: Solid green LED
HDD Access Indicator: Flashing green LED
FeaturesFull steel construction commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies.
Perfect for rugged applications and complies to flammability requirements
Fits 4 x 7mm to 15mm 2.5” SAS/SATA HDD or SSD in a single external 5.25” bay for high performance RAID applications.
Requires only a single 15pin power connectors to power all 4 bays
Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs
Active Power Technology (APT) - individual led & cooling fan only powers up if there is a drive installed in
وزن الشحنة0.93 kg
أبعاد الطرد165 × 165 × 56 mm

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the 4-bay MB607SP-B cage fit in my older case that only has a single external 5.25" bay?

Yes, the MB607SP-B occupies exactly one external half-height 5.25" bay while holding four 2.5" SATA drives.

How can I confirm the 40 mm fan is cooling my drives properly after installation?

The fan has a 3-mode speed switch — off, low for SSDs, high for mechanical drives — so you can hear and feel the airflow change when you toggle it.

Does the MB607SP-B ship with the four SATA data cables and the 15-pin SATA power cable I need, or must I buy them separately?

The package includes the cage and a single 15-pin SATA power connector; four 7-pin SATA data cables are not included and must be purchased separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.