نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Three black 120mm reverse-blade fans with ARGB infinity mirrors

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm Reverse Blade ARGB Case Fan 3-Pack Black

SKU CH-K3W5-D3B0J

Three-pack of 120 mm reverse-blade ARGB case fans with three-sided infinite-mirror lighting, hydraulic bearings and 800–1850 RPM PWM control

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black Reverse-3Pack

  • Three-sided infinite-mirror ARGB creates layered 0.5 mm depth lighting
  • Reverse-blade design enables flexible intake or exhaust airflow configurations
  • Hydraulic bearing supports 800-1850 RPM operation with reduced wear
  • Quiet 29 dBA noise level at 58.36 CFM airflow and 2.07 mmH₂O pressure
  • Double-sided silicone pads minimise vibration resonance when mounted in chassis

Reverse Blade ARGB Case Fan 3-Pack

The Jungle Leopard Prism6 MAX 120mm reverse blade fan comes in a three-pack for builders who want coordinated intake or exhaust with a unified lighting theme. Each unit uses a hydraulic bearing and nine balanced blades to move air through radiators or mesh panels. The black frame and 5V 3-pin ARGB connector suit modern motherboard ecosystems. Buyers without a 5V 3-pin header will need a separate controller to synchronise the lighting.

PWM Speed Range and Noise Ceiling

The fan spins between 800 and 1850 RPM with a 10 percent tolerance, delivering 58.36 CFM at 2.07 mmH2O static pressure. At maximum speed the noise level reaches 29 dBA, which is audible in a quiet room but low enough for most desk-side builds. The 4-pin PWM header allows the motherboard to scale speed automatically with temperature curves. Builders who need silent operation below 20 dBA at load should look elsewhere.

5V 3-Pin ARGB Header Requirement

Synchronised lighting only works when the motherboard provides a 5V 3-pin addressable RGB header; a standard 12V 4-pin RGB header cannot drive the LEDs. The fan also includes a small 4-pin power connector for the motor. If your board lacks the 5V 3-pin header, you must add an external ARGB controller to enable colour effects. This single compatibility check decides whether the kit works out of the box.

أبرز المميزات

  • Three-sided infinite-mirror ARGB creates layered 0.5 mm depth lighting
  • Reverse-blade design enables flexible intake or exhaust airflow configurations
  • Hydraulic bearing supports 800-1850 RPM operation with reduced wear
  • Quiet 29 dBA noise level at 58.36 CFM airflow and 2.07 mmH₂O pressure
  • Double-sided silicone pads minimise vibration resonance when mounted in chassis

المواصفات

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Which version should I choose between the forward and reverse blade models?

Choose the reverse blade model if you want the fan to pull air through a radiator or filter from the opposite side of the motor hub; choose the forward blade model for standard intake or exhaust where air moves away from the motor hub. Both share the same 800-1850 RPM range and 58.36 CFM airflow.

What does the 58.36 CFM airflow figure mean for actual cooling performance?

At maximum speed the fan moves 58.36 cubic feet of air per minute, which is sufficient for typical case ventilation or a 120 mm radiator; the 2.07 mmH₂O static pressure helps push air through restrictive meshes or heatsink fins.

How does the 5 V 3-pin ARGB connector limit lighting control?

The 5 V 3-pin ARGB header requires a compatible motherboard or a separate controller; without a 5 V 3-pin header on the motherboard the lighting cannot be synchronised and will remain in default mode.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.