Jungle Leopard Prism6 PRO ARGB X3 Reverse Blade 120mm Case Fan White 3-Pack
- 1 Fan
- Case Fan
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Jungle Leopard
Three-pack of 120 mm reverse-blade ARGB case fans with three-sided infinite-mirror lighting, hydraulic bearings and 800–1850 RPM PWM control
Color Black Reverse-3Pack
The Jungle Leopard Prism6 MAX 120mm reverse blade fan comes in a three-pack for builders who want coordinated intake or exhaust with a unified lighting theme. Each unit uses a hydraulic bearing and nine balanced blades to move air through radiators or mesh panels. The black frame and 5V 3-pin ARGB connector suit modern motherboard ecosystems. Buyers without a 5V 3-pin header will need a separate controller to synchronise the lighting.
The fan spins between 800 and 1850 RPM with a 10 percent tolerance, delivering 58.36 CFM at 2.07 mmH2O static pressure. At maximum speed the noise level reaches 29 dBA, which is audible in a quiet room but low enough for most desk-side builds. The 4-pin PWM header allows the motherboard to scale speed automatically with temperature curves. Builders who need silent operation below 20 dBA at load should look elsewhere.
Synchronised lighting only works when the motherboard provides a 5V 3-pin addressable RGB header; a standard 12V 4-pin RGB header cannot drive the LEDs. The fan also includes a small 4-pin power connector for the motor. If your board lacks the 5V 3-pin header, you must add an external ARGB controller to enable colour effects. This single compatibility check decides whether the kit works out of the box.
| Brand | Jungle Leopard |
|---|---|
| Series | Prism6 MAX |
| Model | JL Prism6 MAX BK |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 1850RPM |
| Air Flow | 58.36CFM |
| Air Pressure | 2.07mmH20 |
| Noise Level | =29DBA |
| Power Connector | 3 / 4 Pin |
| Color | Black / White |
| LED | ARGB |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Choose the reverse blade model if you want the fan to pull air through a radiator or filter from the opposite side of the motor hub; choose the forward blade model for standard intake or exhaust where air moves away from the motor hub. Both share the same 800-1850 RPM range and 58.36 CFM airflow.
At maximum speed the fan moves 58.36 cubic feet of air per minute, which is sufficient for typical case ventilation or a 120 mm radiator; the 2.07 mmH₂O static pressure helps push air through restrictive meshes or heatsink fins.
The 5 V 3-pin ARGB header requires a compatible motherboard or a separate controller; without a 5 V 3-pin header on the motherboard the lighting cannot be synchronised and will remain in default mode.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?