نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

KHACHIMO

KHACHIMO ATX power supply 27V 22.2A 600W 80 PLUS Gold

SKU CH-MTG0-M8KXS

Delivers 600 W at 27 V and 22.2 A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power operation

  • TypeATX
  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

27 V ATX power supply

This KHACHIMO unit delivers a single 27 V rail rated at 22.2 A for 600 W total output. It carries 80 PLUS Gold certification and uses resonant LLC topology with DC-to-DC conversion. Modern Standby compatibility and a zero-RPM fan mode keep the system quiet at low loads.

Suited for industrial or specialised builds

Designed for equipment that requires a dedicated 27 V source, such as certain embedded or industrial systems. It is not for standard desktop PCs that need the conventional multi-voltage ATX pinout.

27 V 22.2 A single-rail output

The defining specification is the fixed 27 V rail providing up to 22.2 A. Only choose this supply if your hardware explicitly demands that exact voltage and current combination.

أبرز المميزات

  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

المواصفات

TypeATX

أسئلة حول هذا المنتج

How do I install the KHACHIMO ATX power supply and what step is often missed?

Mount the unit in a standard ATX case using four screws, connect the 24-pin motherboard and CPU power cables, then verify the power switch is set to 27 V before first boot.

What maintenance or replacement will this 600 W supply need later?

The Zero RPM fan mode keeps the fan off at low and medium loads; clean dust from the intake vents annually and replace the fan only if bearing noise appears after extended high-load use.

What limit appears first during sustained full-load operation?

Continuous output is capped at 600 W with 22.2 A on the 27 V rail; exceeding either value triggers over-current protection and shuts the unit down.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.