OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
16GB DDR3 1600 ECC registered memory with CL11 latency for server stability
This 16 GB DDR3 module is built for servers that demand maximum stability and continuous operation. It uses registered ECC technology to detect and correct data errors in real time. The product is suited for IT professionals managing infrastructure where downtime is unacceptable.
The memory runs at DDR3 1600 (PC3 12800) with a CAS latency of CL11 and a voltage of 1.50 V. Registered buffering adds one clock cycle to command timing, which is standard for this class of module. Systems must support registered ECC DDR3 to use this memory; consumer platforms that accept only unbuffered non-ECC DIMMs cannot use it.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the latches click, and verify detection in BIOS. The most common issue is mixing registered modules with unbuffered memory or populating slots in an order the server firmware does not support. The advanced Product Change Notification process helps maintain consistent component sourcing for future upgrades.
| Brand | Kingston |
|---|---|
| Model | KVR16R11D4/16HA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Standard 2G X 72 FBGA, Gold w/TS |
| وزن الشحنة | 0.02 kg |
| أبعاد الطرد | 171 × 56 × 17 mm |
This module provides 16GB per stick at DDR3 1600 with ECC Registered operation; match total capacity to your motherboard's slot count and maximum supported memory.
It runs at 1600 MT/s with CL11 latency and 1.50V, giving the rated throughput for compatible DDR3 platforms when populated according to the board's memory-configuration rules.
The 240-pin DDR3 form factor with registered ECC requires a server chipset that supports registered modules; speed will not exceed DDR3 1600 and the memory controller must be DDR3 compatible.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟