OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
1GB DDR2 667 ECC fully buffered server memory with CL5 latency and a heat spreader
Kingston KVR667D2D8F5/1GI is a 1GB DDR2 667 (PC2 5300) module built for servers that require fully buffered ECC memory. It uses a 240-pin interface, runs at 1.80V with CL5 latency, and includes a heat spreader. The stick is Intel certified and listed as new condition.
This module suits administrators maintaining legacy DDR2 platforms that specifically call for fully buffered ECC DIMMs. It is not for systems that accept only unbuffered or registered non-FB-DIMM memory, nor for boards limited to a different pin count or voltage. Buyers needing higher capacity per slot should look elsewhere.
The defining specification is the fully buffered DDR2 667 (PC2 5300) design with ECC and a 240-pin form factor. Only motherboards that explicitly support FB-DIMM DDR2 at this speed and voltage can use it. Match the memory type exactly or the module will not function.
| Brand | Kingston |
|---|---|
| Model | KVR667D2D8F5/1GI |
| Capacity | 1GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Heat Spreader | Yes |
| وزن الشحنة | 0.07 kg |
| أبعاد الطرد | 171 × 57 × 13 mm |
Yes, the 240-pin DDR2 SDRAM form factor matches the FB-DIMM slot used for fully buffered memory.
Align the notch on the 240-pin edge connector with the key in the FB-DIMM slot, then press firmly until the retention clips click shut.
The integrated heat spreader is a passive component with no moving parts and requires no scheduled maintenance or replacement.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟