EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
2GB DDR2 800 desktop module rated CL6 at 1.8V, delivering 6.4GB/s bandwidth
This 2GB DDR2 800 module is built for older desktop systems that still run on DDR2 memory. It delivers a 2GB capacity at 800MHz with a CL6 latency and operates at the standard 1.8V voltage. The unbuffered, non-ECC design fits typical home and office motherboards from that era.
The module follows the PC2 6400 standard, providing up to 6.4GBps bandwidth per channel. Its CL6 timing and 1.80V operation match the JEDEC specification for DDR2 800, so the memory runs at its rated speed without manual configuration. No extra software or accessories are included to change this behaviour.
Installation requires aligning the notch on the DIMM with the motherboard slot key and pressing down until the retention clips lock. Because the module is unbuffered and non-ECC, it will not work in servers or workstations that require registered or ECC memory. Buyers who need more than 2GB per slot or a different DDR generation must choose another product.
| Brand | Kingston |
|---|---|
| Model | KVR800D2N6/2G |
| Capacity | 2GB |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| وزن الشحنة | 0.02 kg |
| أبعاد الطرد | 147 × 46 × 9 mm |
The modules run at the standard 1.80V for DDR2 and are unbuffered, so they do not require active cooling or voltage changes; normal case airflow is sufficient.
The rated bandwidth is 6.4GBps per channel at 800MHz, and the CL6 latency sets the timing limit you will reach under sustained load.
With no ECC or registered circuitry and a standard 1.80V supply, the module generates minimal heat and is completely silent; typical chassis airflow handles it.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
No language matches that.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟