HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Lexar
M.2 2280 internal SSD with PCIe 4.0 x4 interface delivering up to 7400 MB/s read and 6500 MB/s write speeds
Capacity 1TB
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Lexar NM790 is a 1TB internal solid state drive built for gamers, professionals and creators who need fast storage. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe protocol. Sequential read speeds reach up to 7400 MBps and write speeds up to 6500 MBps. The drive is also validated for PlayStation 5 expansion.
The single-sided M.2 2280 design fits directly into compatible motherboard slots or laptop bays without extra cables. No heatsink is included, so thermal performance depends on the host device’s own cooling solution. Host Memory Buffer 3.0 enables the system DRAM to assist caching for smoother transfers. Ensure the motherboard or laptop BIOS supports PCIe 4.0 NVMe drives to avoid detection issues.
One terabyte provides room for large game libraries, creative project files and operating system drives. The 1000 TBW endurance rating supports heavy daily write workloads over the drive’s lifetime. Power draw is up to 40 percent lower than DRAM-cache Gen 4 SSDs, helping laptop battery life. When the SLC cache fills during sustained writes, speeds will drop to the native TLC rate.
| Brand | Lexar |
|---|---|
| Series | nm790 |
| Model | LNM790X001T-RNNNU |
| Part Number | LNM790X001T-RNNNU |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6500 MBps |
| HeatSink | without HeatSink |
| وزن الشحنة | 0.05 kg |
| أبعاد الطرد | 165 × 102 × 15 mm |
The drive is confirmed compatible with PlayStation 5. It is a single-sided M.2 2280 module without a heatsink, so you will need to add a compatible heatsink before installing it in the console.
The drive is rated for 1000 TBW, which represents a very high total bytes written figure suitable for intensive gaming, video editing and other demanding tasks.
Yes. The drive runs on PCIe 4.0 x4 but is backward compatible with PCIe 3.0 slots, where it will still deliver significantly higher sequential speeds than a typical Gen 3 SSD.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟