نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two small green circuit boards with USB-C ports and pin headers

LORDWORLD

LORDWORLD ESP32-S3 Mini Development Board 2 PCS with Pre-Soldered Header

SKU CH-2281-KXD4A

Twin ESP32-S3 boards with pre-soldered headers, dual-core 240 MHz processor, 2.4 GHz Wi-Fi and Bluetooth 5, plus 34 GPIO pins for rapid IoT prototyping

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

Dual-Core ESP32-S3 Boards for Makers

This pack supplies two LORDWORLD ESP32-S3 Mini development boards, each built around a 32-bit Xtensa LX7 dual-core processor running at up to 240MHz. They arrive with headers already soldered, so prototypes can start immediately on a breadboard or custom carrier. Onboard 4MB Flash and 2MB PSRAM give room for firmware and runtime data.

Wi-Fi and Bluetooth LE Projects.

The 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE radios suit sensors, home-automation nodes and wearable prototypes that trade bandwidth for range and power economy. Builders needing 5GHz Wi-Fi, Ethernet or cellular backhaul will need a different platform. The 512KB SRAM and 384KB ROM limit heavy local compute or large buffers.

Breadboard-Ready with 34 GPIO and USB-C

Castellated edges let the module be soldered directly to a carrier board, while the pre-soldered headers drop straight into a 0.1-inch breadboard. A USB Type-C connector provides power and the integrated USB serial controller for flashing and debug. Thirty-four configurable GPIO pins expose 4 SPI, 2 I2C, 3 UART, 2 I2S and 2 ADC channels for peripheral expansion.

أبرز المميزات

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

What host computer interface is needed to program the board's USB serial port controller?

A USB Type-C port and cable are required to connect the board's integrated full-speed USB serial controller to the development host.

Will the board's 2.4GHz Wi-Fi 802.11 b/g/n radio coexist with older 2.4GHz Bluetooth peripherals?

Yes, the board supports Bluetooth 5 LE and 2.4GHz Wi-Fi on the same radio band, allowing simultaneous operation with legacy 2.4GHz devices.

How can I confirm the dual-core processor is running at 240MHz after flashing firmware?

Read the CPU frequency register via the serial console or log the configured clock speed from your firmware's startup routine.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.