我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two small green circuit boards with USB-C ports and pin headers

LORDWORLD

LORDWORLD ESP32-S3 Mini Development Board 2 PCS with Pre-Soldered Header

SKU CH-2281-KXD4A

Twin ESP32-S3 boards with pre-soldered headers, dual-core 240 MHz processor, 2.4 GHz Wi-Fi and Bluetooth 5, plus 34 GPIO pins for rapid IoT prototyping

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

Dual-Core ESP32-S3 Boards for Makers

This pack supplies two LORDWORLD ESP32-S3 Mini development boards, each built around a 32-bit Xtensa LX7 dual-core processor running at up to 240MHz. They arrive with headers already soldered, so prototypes can start immediately on a breadboard or custom carrier. Onboard 4MB Flash and 2MB PSRAM give room for firmware and runtime data.

Wi-Fi and Bluetooth LE Projects.

The 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE radios suit sensors, home-automation nodes and wearable prototypes that trade bandwidth for range and power economy. Builders needing 5GHz Wi-Fi, Ethernet or cellular backhaul will need a different platform. The 512KB SRAM and 384KB ROM limit heavy local compute or large buffers.

Breadboard-Ready with 34 GPIO and USB-C

Castellated edges let the module be soldered directly to a carrier board, while the pre-soldered headers drop straight into a 0.1-inch breadboard. A USB Type-C connector provides power and the integrated USB serial controller for flashing and debug. Thirty-four configurable GPIO pins expose 4 SPI, 2 I2C, 3 UART, 2 I2S and 2 ADC channels for peripheral expansion.

商品特色

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

商品規格

BrandLORDWORLD

商品問答

What host computer interface is needed to program the board's USB serial port controller?

A USB Type-C port and cable are required to connect the board's integrated full-speed USB serial controller to the development host.

Will the board's 2.4GHz Wi-Fi 802.11 b/g/n radio coexist with older 2.4GHz Bluetooth peripherals?

Yes, the board supports Bluetooth 5 LE and 2.4GHz Wi-Fi on the same radio band, allowing simultaneous operation with legacy 2.4GHz devices.

How can I confirm the dual-core processor is running at 240MHz after flashing firmware?

Read the CPU frequency register via the serial console or log the configured clock speed from your firmware's startup routine.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。