暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two small green circuit boards with USB-C ports and pin headers

LORDWORLD

LORDWORLD ESP32-S3 Mini Development Board 2 PCS with Pre-Soldered Header

SKU CH-2281-KXD4A

Twin ESP32-S3 boards with pre-soldered headers, dual-core 240 MHz processor, 2.4 GHz Wi-Fi and Bluetooth 5, plus 34 GPIO pins for rapid IoT prototyping

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

Dual-Core ESP32-S3 Boards for Makers

This pack supplies two LORDWORLD ESP32-S3 Mini development boards, each built around a 32-bit Xtensa LX7 dual-core processor running at up to 240MHz. They arrive with headers already soldered, so prototypes can start immediately on a breadboard or custom carrier. Onboard 4MB Flash and 2MB PSRAM give room for firmware and runtime data.

Wi-Fi and Bluetooth LE Projects.

The 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE radios suit sensors, home-automation nodes and wearable prototypes that trade bandwidth for range and power economy. Builders needing 5GHz Wi-Fi, Ethernet or cellular backhaul will need a different platform. The 512KB SRAM and 384KB ROM limit heavy local compute or large buffers.

Breadboard-Ready with 34 GPIO and USB-C

Castellated edges let the module be soldered directly to a carrier board, while the pre-soldered headers drop straight into a 0.1-inch breadboard. A USB Type-C connector provides power and the integrated USB serial controller for flashing and debug. Thirty-four configurable GPIO pins expose 4 SPI, 2 I2C, 3 UART, 2 I2S and 2 ADC channels for peripheral expansion.

特長

  • Dual-core processor reaches 240 MHz for responsive IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 enable wireless connectivity
  • 512 KB SRAM plus 384 KB ROM support larger firmware
  • 34 GPIO pins with multiple interfaces allow flexible peripheral wiring
  • Pre-soldered headers on two boards let you start prototyping immediately

仕様

BrandLORDWORLD

この商品に関する質問

What host computer interface is needed to program the board's USB serial port controller?

A USB Type-C port and cable are required to connect the board's integrated full-speed USB serial controller to the development host.

Will the board's 2.4GHz Wi-Fi 802.11 b/g/n radio coexist with older 2.4GHz Bluetooth peripherals?

Yes, the board supports Bluetooth 5 LE and 2.4GHz Wi-Fi on the same radio band, allowing simultaneous operation with legacy 2.4GHz devices.

How can I confirm the dual-core processor is running at 240MHz after flashing firmware?

Read the CPU frequency register via the serial console or log the configured clock speed from your firmware's startup routine.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。