OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Montech
ATX mid-tower with reversible layout, mesh front panel and vertical GPU support holds 420 mm graphics cards and 360 mm top radiators
The Montech HS01 is a black ATX mid-tower case built from SPCC steel and tempered glass. It accepts ATX, Micro-ATX and Mini-ITX motherboards and provides fourteen expansion slots for flexible card placement. The reversible layout lets the whole interior flip to the opposite side for desk positioning.
A mesh front panel feeds bottom intake while top exhaust creates a natural chimney effect. The case supports three 120 mm fans at the bottom, front and top plus two at the rear. Radiator clearance reaches 360 mm on top and 120 mm at the rear and bottom. Rotatable PCIe slots enable a vertical graphics card without extra brackets.
Maximum graphics card length is 420 mm, CPU cooler height is 175 mm and power supply length is 200 mm. Two internal 3.5 inch bays and two 2.5 inch bays handle storage. The relocated PSU area works with Back-Connect motherboards for cleaner cable routing. Check your cooler, GPU and PSU dimensions against these limits before ordering.
| Brand | Montech |
|---|---|
| Part Number | HS01(B) |
| Color | Black |
| Case Material | SPCC / Tempered Glass |
| Motherboard Compatibility | ATX / Micro ATX / Mini ITX |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 14 |
| Fan Options | Bottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm |
| Radiator Options | Bottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 200 mm |
| Dimensions | 18.91" x 9.45" x 18.91" |
| وزن الشحنة | 12.34 kg |
| أبعاد الطرد | 584 × 559 × 330 mm |
The mesh front panel and bottom intake draw air directly into the case, so dust builds up on the filters. Remove and rinse the magnetic filters every few months, or more often in dusty rooms, to maintain the chimney-effect cooling path.
The 420 mm maximum GPU length is the tighter constraint; a 360 mm radiator fits in the top, but long triple-fan cards leave only a few millimetres of clearance before the front panel.
Noise and temperature depend on the fans you choose and their speed curves; the case itself adds no active cooling, so select quiet PWM fans and tune curves in BIOS for the acoustic and thermal profile you prefer.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟