نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver aluminium rectangular power supply unit with terminal connectors on one side

myVolts

myVolts S-60-24 24V 2.5A 60W AT power supply

SKU CH-NM3G-FEH4Z

An AT-type 24 V 2.5 A 60 W switch-mode supply with short-circuit, overload and over-voltage protection, aluminium-alloy housing and CCC, FCC, CE compliance

  • TypeAT
  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

60 W AT Power Supply for Industrial

The myVolts S-60-24 delivers a regulated 24 V output at up to 2.5 A from a 100–240 V AC input. Its aluminium alloy chassis relies on natural convection cooling. The unit suits industrial automation, LED installations, CCTV systems and computer engineering projects that require a compact AT-type source.

Circuit, Overload and Overvoltage Protection

Built-in safeguards disconnect the output during fault conditions, preventing damage to connected equipment. A 100 % burn-in test at full load verifies reliability before shipment. The adjustable voltage trim (+ V / ADJ) allows fine-tuning of the 24 V rail for sensitive loads.

0–40 °C Operating Range with Passive Cooling

The supply is rated for continuous operation between 0 and 40 °C in non-condensing humidity up to 95 %. Without forced airflow, adequate ventilation around the 85 × 58 × 33 mm enclosure is essential. Storage temperatures from –20 to 60 °C are supported when the unit is not powered.

أبرز المميزات

  • High efficiency and low DC ripple deliver stable 24 V output
  • circuit, overload and over-voltage protection safeguards connected equipment
  • Aluminium alloy enclosure enables fan-less cooling for silent operation
  • 100 % full-load burn-in test confirms reliable 60 W performance
  • Wide AC 100–240 V input suits global industrial and automation use

المواصفات

TypeAT

أسئلة حول هذا المنتج

Does the myVolts S-60-24 have a fan that will need cleaning or replacing later?

The unit uses natural convection cooling with no moving parts, so there is no fan to maintain or replace.

What limits continuous operation at the full 2.5 A output?

The supply is rated for 0–40 °C ambient; sustained loads near 60 W at the top of that range will hit the thermal limit first.

How much heat and noise should I expect when the supply runs all day at 60 W?

Natural convection means silent operation; the aluminium case will become warm but stays within the specified 0–40 °C working envelope.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.