نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green circuit boards with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM Kit for POSIFLEX XT-6315E JIVA

SKU CH-D54J-T2D19

DDR4 SODIMM kit adds 16 GB across two 8 GB modules at 2133 MHz CL15 for the POSIFLEX XT-6315E JIVA terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit upgrades POS terminal memory capacity
  • DDR4 2133 speed matches system bus for stable operation
  • CL15 latency supports responsive transaction processing
  • 2 V modules reduce power draw in fanless design
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly

POSIFLEX XT-6315E JIVA memory kit

This 16 GB DDR4 SODIMM kit is built for the POSIFLEX XT-6315E JIVA fanless POS terminal with Celeron chipset. It contains two 8 GB modules rated at 2133 MHz PC4-17000 with CL15 latency and 1.2 V operation. The 260-pin unbuffered non-ECC design matches the system's factory memory specification.

Sustained load behaviour on fanless terminals

Dual-rank 2Rx8 organisation and major OEM chips from Samsung Micron or Hynix maintain stable throughput during long transaction queues. The 1.2 V rating keeps thermal output low inside the sealed chassis. CL15 timing delivers consistent latency without voltage scaling that could stress the passive cooling.

Installing in the POSIFLEX XT-6315E

The SODIMM slots are accessed by removing the terminal's bottom cover; no tools beyond a small screwdriver are required. Align the 260-pin notch, press firmly until the side clips click, then replace the cover. The only common issue is inserting a module at an angle, which bends pins and prevents the system from posting.

أبرز المميزات

  • 16 GB kit upgrades POS terminal memory capacity
  • DDR4 2133 speed matches system bus for stable operation
  • CL15 latency supports responsive transaction processing
  • 2 V modules reduce power draw in fanless design
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

أسئلة حول هذا المنتج

Does the 1.20V DDR4 2133 kit run hot or draw extra power in a fanless POS terminal running all day?

The modules operate at the standard DDR4 1.20V with no heat spreader, so they add minimal heat and power draw inside the fanless XT-6315E chassis.

What must the POSIFLEX XT-6315E JIVA already have for this 260-pin SODIMM kit to work?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at PC4-17000 speed.

Will the CL15 2Rx8 sticks work alongside any original memory still installed in the XT-6315E?

They will run together if the existing memory is also DDR4 non-ECC unbuffered SODIMM; the system will operate at the slowest module's timing.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.