暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM Kit for POSIFLEX XT-6315E JIVA

SKU CH-D54J-T2D19

DDR4 SODIMM kit adds 16 GB across two 8 GB modules at 2133 MHz CL15 for the POSIFLEX XT-6315E JIVA terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit upgrades POS terminal memory capacity
  • DDR4 2133 speed matches system bus for stable operation
  • CL15 latency supports responsive transaction processing
  • 2 V modules reduce power draw in fanless design
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly

POSIFLEX XT-6315E JIVA memory kit

This 16 GB DDR4 SODIMM kit is built for the POSIFLEX XT-6315E JIVA fanless POS terminal with Celeron chipset. It contains two 8 GB modules rated at 2133 MHz PC4-17000 with CL15 latency and 1.2 V operation. The 260-pin unbuffered non-ECC design matches the system's factory memory specification.

Sustained load behaviour on fanless terminals

Dual-rank 2Rx8 organisation and major OEM chips from Samsung Micron or Hynix maintain stable throughput during long transaction queues. The 1.2 V rating keeps thermal output low inside the sealed chassis. CL15 timing delivers consistent latency without voltage scaling that could stress the passive cooling.

Installing in the POSIFLEX XT-6315E

The SODIMM slots are accessed by removing the terminal's bottom cover; no tools beyond a small screwdriver are required. Align the 260-pin notch, press firmly until the side clips click, then replace the cover. The only common issue is inserting a module at an angle, which bends pins and prevents the system from posting.

特長

  • 16 GB kit upgrades POS terminal memory capacity
  • DDR4 2133 speed matches system bus for stable operation
  • CL15 latency supports responsive transaction processing
  • 2 V modules reduce power draw in fanless design
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

Does the 1.20V DDR4 2133 kit run hot or draw extra power in a fanless POS terminal running all day?

The modules operate at the standard DDR4 1.20V with no heat spreader, so they add minimal heat and power draw inside the fanless XT-6315E chassis.

What must the POSIFLEX XT-6315E JIVA already have for this 260-pin SODIMM kit to work?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at PC4-17000 speed.

Will the CL15 2Rx8 sticks work alongside any original memory still installed in the XT-6315E?

They will run together if the existing memory is also DDR4 non-ECC unbuffered SODIMM; the system will operate at the slowest module's timing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。