BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277984BTC
Dostępny
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM Kit for POSIFLEX XT-6315E JIVA
DDR4 SODIMM kit adds 16 GB across two 8 GB modules at 2133 MHz CL15 for the POSIFLEX XT-6315E JIVA terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit upgrades POS terminal memory capacity
- DDR4 2133 speed matches system bus for stable operation
- CL15 latency supports responsive transaction processing
- 2 V modules reduce power draw in fanless design
- 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly
POSIFLEX XT-6315E JIVA memory kit
This 16 GB DDR4 SODIMM kit is built for the POSIFLEX XT-6315E JIVA fanless POS terminal with Celeron chipset. It contains two 8 GB modules rated at 2133 MHz PC4-17000 with CL15 latency and 1.2 V operation. The 260-pin unbuffered non-ECC design matches the system's factory memory specification.
Sustained load behaviour on fanless terminals
Dual-rank 2Rx8 organisation and major OEM chips from Samsung Micron or Hynix maintain stable throughput during long transaction queues. The 1.2 V rating keeps thermal output low inside the sealed chassis. CL15 timing delivers consistent latency without voltage scaling that could stress the passive cooling.
Installing in the POSIFLEX XT-6315E
The SODIMM slots are accessed by removing the terminal's bottom cover; no tools beyond a small screwdriver are required. Align the 260-pin notch, press firmly until the side clips click, then replace the cover. The only common issue is inserting a module at an angle, which bends pins and prevents the system from posting.
Najważniejsze cechy
- 16 GB kit upgrades POS terminal memory capacity
- DDR4 2133 speed matches system bus for stable operation
- CL15 latency supports responsive transaction processing
- 2 V modules reduce power draw in fanless design
- 260-pin SODIMM form factor fits POSIFLEX XT-6315E JIVA slot exactly
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT |
Pytania dotyczące tego produktu
Does the 1.20V DDR4 2133 kit run hot or draw extra power in a fanless POS terminal running all day?
The modules operate at the standard DDR4 1.20V with no heat spreader, so they add minimal heat and power draw inside the fanless XT-6315E chassis.
What must the POSIFLEX XT-6315E JIVA already have for this 260-pin SODIMM kit to work?
The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at PC4-17000 speed.
Will the CL15 2Rx8 sticks work alongside any original memory still installed in the XT-6315E?
They will run together if the existing memory is also DDR4 non-ECC unbuffered SODIMM; the system will operate at the slowest module's timing.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
