نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC UDIMM 1Rx8 1.1V

SKU CH-4Y15-YBTA5

16GB DDR5 4800 ECC unbuffered UDIMM with 1Rx8 organisation, CAS 40 latency and 1.1V operation

  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • Rank1Rx8
  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

NEMIX RAM 16GB DDR5 4800 ECC UDIMM

This 16 GB unbuffered DIMM runs at DDR5 4800 with CAS 40 latency and 1.1 V operation. It provides error-correcting code protection for data integrity in compatible platforms. The module uses a single-rank 1Rx8 organisation based on major OEM DRAM chips.

Suits servers and workstations needing DDR5 4800

Systems that require registered or load-reduced DIMMs cannot use this unbuffered module. Builders targeting higher speeds or lower latencies than 4800 MT/s and CL40 should look at alternative specifications. Non-ECC platforms will not utilise the error-correction capability.

DDR5 4800 speed with ECC and 1.1 V

The PC5-38400 rating confirms 4800 MT/s transfer rate at 1.1 volts. This single specification determines whether the module matches the memory controller requirements of the target system. Verify platform support for DDR5 4800 ECC UDIMM before purchase.

أبرز المميزات

  • ECC protection safeguards data integrity with built-in error correction
  • 4800 MT/s speed delivers high bandwidth for demanding server workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility
  • 288-pin UDIMM form factor fits standard unbuffered DDR5 slots

المواصفات

BrandNEMIX RAM
ModelPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
Part NumberPart#: ME38400-618K1-SM-SYS-111AD-HN2-01-G2
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

أسئلة حول هذا المنتج

Will this 288-pin DDR5 UDIMM fit my motherboard's memory slots?

This module uses the standard 288-pin DDR5 UDIMM form factor. It fits any desktop or workstation board with DDR5 UDIMM slots keyed for 1.1 V operation.

What is the correct way to seat this 1Rx8 ECC module so the system recognises all 16 GB?

Align the notch with the slot key, press straight down until both retention clips click. A common error is stopping at the first click; both clips must latch to make full contact.

When should I plan to replace this DDR5 4800 ECC UDIMM?

DDR5 modules have no moving parts and no scheduled replacement interval. Replace only if memory diagnostics report correctable ECC errors rising above the platform threshold or a module fails completely.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.