OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
256 GB DDR5 ECC registered server memory kit with two 128 GB modules at 4800 MT/s, CL40, 1.1 V for Dell Precision 5860 workstations
This kit provides 256GB of DDR5 memory in two 128GB registered DIMMs. It is built for Dell Precision 5860 tower workstations that require ECC protection. The modules operate at 4800 MT/s with a CAS latency of 40. They run at 1.1V and use a 288-pin form factor.
Registered buffering and ECC correction maintain data integrity during continuous workloads. The 4Rx4 organisation allows high density without increasing electrical load on the memory controller. Operation at 1.1V limits heat output during extended compute tasks. No heat spreader is fitted, so chassis airflow must handle cooling.
The PC5-38400 rating defines the peak transfer rate of the DDR5 interface. Maximum capacity per DIMM is 128GB with this rank configuration. Registered DIMMs require a motherboard that supports buffered memory. Mixing with unbuffered or non-ECC modules is not supported.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Each module operates at 1.10V, the standard DDR5 voltage for registered ECC memory. Total system draw depends on the Dell Precision 5860 memory controller and how many slots are populated.
The kit is listed as compatible with the Dell Precision 5860 Tower Workstation. Dell validates memory configurations per BIOS release, so check the workstation's support page for the latest firmware before installing.
Mixing ranks and capacities is possible on DDR5 platforms, but the memory controller will run all modules at the lowest common speed and timing. For best stability, populate identical 4Rx4 modules per channel.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟