نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 256GB DDR5-6400 ECC RDIMM 2x128GB CL52 1.1V Supermicro X14SRA-F memory upgrade

SKU CH-C6ZH-ZFM8N

256 GB DDR5-6400 ECC registered RDIMM kit (2×128 GB, CL52, 1.1 V, 4Rx4) validated for Supermicro X14SRA-F motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules for maximum density
  • DDR5-6400 speed rated at PC5-51200 for high bandwidth
  • CL52 latency at 1.1 V for efficient operation
  • ECC registered 4Rx4 design prevents data corruption under load
  • Validated for Supermicro X14SRA-F motherboard with 288-pin RDIMM form factor

Exact-match DDR5-6400 ECC RDIMM kit

This NEMIX RAM kit delivers 256 GB as two 128 GB DDR5-6400 registered ECC modules. Each stick is a 288-pin RDIMM with 4Rx4 organisation, CL52 latency and 1.1 V operation. The modules are validated for the Supermicro X14SRA-F motherboard and use major OEM Samsung, Micron or Hynix chips.

Verify motherboard population rules

Confirm that your X14SRA-F firmware revision and CPU configuration support fully populated 4Rx4 registered DIMMs at 6400 MT/s. Consult the board manual for approved slot order, maximum capacity per channel and any BIOS updates required before installation.

Suits Supermicro X14SRA-F capacity upgrades

Ideal for administrators expanding a verified X14SRA-F platform to its maximum registered ECC configuration. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, lower-rank modules or non-ECC memory.

أبرز المميزات

  • 256 GB total capacity from two 128 GB modules for maximum density
  • DDR5-6400 speed rated at PC5-51200 for high bandwidth
  • CL52 latency at 1.1 V for efficient operation
  • ECC registered 4Rx4 design prevents data corruption under load
  • Validated for Supermicro X14SRA-F motherboard with 288-pin RDIMM form factor

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the kit include anything besides the two 128 GB DDR5 RDIMMs, or do I need to buy brackets or cables separately?

The package contains only the two 128 GB DDR5-6400 ECC registered RDIMMs. No brackets, cables or additional accessories are included or required.

My Supermicro X14SRA-F manual lists several DDR5 speed grades. Why choose the CL52 6400 MT/s version?

This kit matches the exact rank, voltage and timing the X14SRA-F memory controller expects, so the board recognises the full 256 GB capacity and runs at the rated 6400 MT/s without down-clocking.

What does the CL52 figure mean once the modules are installed in the server?

CL52 is the CAS latency in clock cycles at DDR5-6400. The registered buffer and ECC add a small overhead, but the controller is tuned for this timing, delivering stable throughput at the full 6400 MT/s data rate.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.