BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278322BTC
متوفر
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX XT-3817 JIVA 17 memory upgrade
A 4 GB DDR3 1333 SODIMM module built for the POSIFLEX XT-3817 JIVA 17 terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
- 35V low-voltage operation reduces power draw in always-on point-of-sale environments
- 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
- CL9 CAS latency keeps transaction processing snappy during peak hours
- 204-pin DDR3 form factor drops straight into the terminal without adapters
POS Terminal Memory Upgrade
This 4GB DDR3 SODIMM is built for the POSIFLEX XT-3817 JIVA 17 terminal. It uses a 204-pin unbuffered non-ECC design at PC3-10600 speed. The module targets repair technicians and IT staff maintaining point-of-sale fleets.
Sustained Load Behaviour
Rated at 1333MHz with CL9 latency, the stick runs at 1.35V nominal and 1.50V maximum. Major-brand Samsung, Micron or Hynix chips are stress-tested under load to verify stability during continuous transaction processing.
Thermals Noise and Power
No heat spreader is fitted, relying on the terminal's internal airflow. Low-voltage DDR3 operation keeps power draw modest and silent, matching the fanless or quiet-cooling design of the POS chassis.
أبرز المميزات
- 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
- 35V low-voltage operation reduces power draw in always-on point-of-sale environments
- 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
- CL9 CAS latency keeps transaction processing snappy during peak hours
- 204-pin DDR3 form factor drops straight into the terminal without adapters
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
أسئلة حول هذا المنتج
How much power does the 1.35V DDR3 SODIMM draw when the POS terminal runs all day?
The module is rated at 1.35V, which is lower than the standard 1.50V DDR3 voltage, reducing power draw and heat during continuous operation in the POSIFLEX terminal.
What must the POSIFLEX XT-3817 JIVA 17 already have for this 204-pin SODIMM to work?
The system needs an available 204-pin DDR3 SODIMM slot that supports 1333MHz PC3-10600 unbuffered non-ECC memory with CL9 timing and 2Rx8 organisation.
Will this DDR3 1333 module run correctly alongside the original memory in the JIVA 17?
Yes, it matches the PC3-10600 speed, CL9 latency, 1.35V voltage and 2Rx8 rank of the factory memory, so the terminal will operate in dual-channel mode without timing conflicts.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
