我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM with black memory chips, 204 pins, low profile form factor

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX XT-3817 JIVA 17 memory upgrade

SKU CH-RA78-KVDQB

A 4 GB DDR3 1333 SODIMM module built for the POSIFLEX XT-3817 JIVA 17 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
  • 35V low-voltage operation reduces power draw in always-on point-of-sale environments
  • 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
  • CL9 CAS latency keeps transaction processing snappy during peak hours
  • 204-pin DDR3 form factor drops straight into the terminal without adapters

POS Terminal Memory Upgrade

This 4GB DDR3 SODIMM is built for the POSIFLEX XT-3817 JIVA 17 terminal. It uses a 204-pin unbuffered non-ECC design at PC3-10600 speed. The module targets repair technicians and IT staff maintaining point-of-sale fleets.

Sustained Load Behaviour

Rated at 1333MHz with CL9 latency, the stick runs at 1.35V nominal and 1.50V maximum. Major-brand Samsung, Micron or Hynix chips are stress-tested under load to verify stability during continuous transaction processing.

Thermals Noise and Power

No heat spreader is fitted, relying on the terminal's internal airflow. Low-voltage DDR3 operation keeps power draw modest and silent, matching the fanless or quiet-cooling design of the POS chassis.

商品特色

  • 4GB DDR3 1333 SODIMM adds responsive memory to your POSIFLEX XT-3817 JIVA 17 terminal
  • 35V low-voltage operation reduces power draw in always-on point-of-sale environments
  • 2Rx8 dual-rank layout increases bandwidth for multitasking at the checkout
  • CL9 CAS latency keeps transaction processing snappy during peak hours
  • 204-pin DDR3 form factor drops straight into the terminal without adapters

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

How much power does the 1.35V DDR3 SODIMM draw when the POS terminal runs all day?

The module is rated at 1.35V, which is lower than the standard 1.50V DDR3 voltage, reducing power draw and heat during continuous operation in the POSIFLEX terminal.

What must the POSIFLEX XT-3817 JIVA 17 already have for this 204-pin SODIMM to work?

The system needs an available 204-pin DDR3 SODIMM slot that supports 1333MHz PC3-10600 unbuffered non-ECC memory with CL9 timing and 2Rx8 organisation.

Will this DDR3 1333 module run correctly alongside the original memory in the JIVA 17?

Yes, it matches the PC3-10600 speed, CL9 latency, 1.35V voltage and 2Rx8 rank of the factory memory, so the terminal will operate in dual-channel mode without timing conflicts.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。