NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
A 64 GB DDR5 ECC registered dual-rank kit with CL40 timing and 1.1 V operation for Dell Precision 5860 workstations
This 64 GB kit contains two 32 GB DDR5 RDIMM modules built for the Dell Precision 5860 Tower Workstation. Registered ECC operation and a 2Rx4 organisation provide the data integrity required by professional server and workstation workloads.
Each module runs at 1.1 V with a CL40 latency at the standard 4800 MT/s speed. The low-voltage DDR5 design limits heat output and power draw, while the absence of a heat spreader keeps the profile slim for dense server chassis airflow.
On-die ECC and register buffering correct single-bit errors and reduce electrical load on the memory controller. This combination improves uptime for critical applications without requiring additional software or configuration steps.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-324K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Power off the workstation, open the chassis, align each module notch with the slot key, press firmly until the latches click, then verify in BIOS that both 32GB sticks register at 4800 MT/s; the step most often missed is fully seating both latches on every module.
No routine maintenance is required; if a correctable error count rises or a module fails, replace the affected 32GB stick with an identical DDR5 4800 CL40 1.1V 2Rx4 RDIMM to keep the kit matched.
The CL40 latency at 1.1V is the primary timing constraint; sustained throughput is bounded by the DDR5 4800 transfer rate and the registered buffer adding one cycle per command.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟