نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular DDR5 memory module with gold edge connectors and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM 288-Pin Supermicro H14DSG-OM memory upgrade

SKU CH-W5XQ-ZBF3A

A 64GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered 288-pin RDIMM validated for the Supermicro H14DSG-OM motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 64GB capacity lets you fully populate server slots for maximum memory throughput
  • DDR5 6400 speed with CL52 latency delivers rated performance the memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx4 rank matches the Supermicro H14DSG-OM motherboard specifications
  • 288-pin RDIMM form factor fits the exact slot type your board requires

64GB DDR5-6400 RDIMM for Supermicro H14DSG-OM

This 64GB DDR5-6400 Registered ECC module is built for the Supermicro H14DSG-OM motherboard. It delivers 64GB of capacity in a single 288-pin RDIMM. The 2Rx4 organisation and 1.1V operating voltage match the board's memory controller requirements exactly. It is intended for servers that need maximum density per slot.

Registered DDR5 population rules limit full-speed

Registered architecture buffers the command and address signals so every slot can be populated without reducing the data rate. The DDR5-6400 (PC5-51200) interface runs at its rated 6400 MT/s when the motherboard's population rules are followed. Mixing ranks or exceeding the approved slots per channel will force the controller to downclock the memory. The board manual defines the supported configurations.

Single-module headroom and density ceiling

One module provides 64GB of ECC-protected capacity, enough for dense virtualisation or in-memory databases on a single channel. Adding further modules scales total memory until the board's maximum supported capacity or slot count is reached. Beyond that limit the system will not recognise the additional memory. No heat spreader is fitted, so airflow must meet the server chassis specification.

أبرز المميزات

  • 64GB capacity lets you fully populate server slots for maximum memory throughput
  • DDR5 6400 speed with CL52 latency delivers rated performance the memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx4 rank matches the Supermicro H14DSG-OM motherboard specifications
  • 288-pin RDIMM form factor fits the exact slot type your board requires

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

أسئلة حول هذا المنتج

Should I choose the 64GB 2Rx4 module or a different capacity for my Supermicro H14DSG-OM?

The 64GB 2Rx4 DDR5 6400 CL52 1.1V RDIMM is the exact-match upgrade for the Supermicro H14DSG-OM. Check your manual for approved population order and maximum supported capacity before buying.

What does the 6400MHz speed deliver once installed in the server?

The module runs at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V. Registered buffering lets every slot operate fully populated at rated speed while ECC corrects single-bit errors on the fly.

How does the 288-pin RDIMM interface limit what I can install?

The board requires 288-pin Registered DDR5 RDIMMs; UDIMM or SODIMM modules will not fit or function. The registered architecture offloads the memory controller so all slots can run fully populated.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.