我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM 288-Pin Supermicro H14DSG-OM memory upgrade

SKU CH-W5XQ-ZBF3A

A 64GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered 288-pin RDIMM validated for the Supermicro H14DSG-OM motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 64GB capacity lets you fully populate server slots for maximum memory throughput
  • DDR5 6400 speed with CL52 latency delivers rated performance the memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx4 rank matches the Supermicro H14DSG-OM motherboard specifications
  • 288-pin RDIMM form factor fits the exact slot type your board requires

64GB DDR5-6400 RDIMM for Supermicro H14DSG-OM

This 64GB DDR5-6400 Registered ECC module is built for the Supermicro H14DSG-OM motherboard. It delivers 64GB of capacity in a single 288-pin RDIMM. The 2Rx4 organisation and 1.1V operating voltage match the board's memory controller requirements exactly. It is intended for servers that need maximum density per slot.

Registered DDR5 population rules limit full-speed

Registered architecture buffers the command and address signals so every slot can be populated without reducing the data rate. The DDR5-6400 (PC5-51200) interface runs at its rated 6400 MT/s when the motherboard's population rules are followed. Mixing ranks or exceeding the approved slots per channel will force the controller to downclock the memory. The board manual defines the supported configurations.

Single-module headroom and density ceiling

One module provides 64GB of ECC-protected capacity, enough for dense virtualisation or in-memory databases on a single channel. Adding further modules scales total memory until the board's maximum supported capacity or slot count is reached. Beyond that limit the system will not recognise the additional memory. No heat spreader is fitted, so airflow must meet the server chassis specification.

商品特色

  • 64GB capacity lets you fully populate server slots for maximum memory throughput
  • DDR5 6400 speed with CL52 latency delivers rated performance the memory controller expects
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx4 rank matches the Supermicro H14DSG-OM motherboard specifications
  • 288-pin RDIMM form factor fits the exact slot type your board requires

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Should I choose the 64GB 2Rx4 module or a different capacity for my Supermicro H14DSG-OM?

The 64GB 2Rx4 DDR5 6400 CL52 1.1V RDIMM is the exact-match upgrade for the Supermicro H14DSG-OM. Check your manual for approved population order and maximum supported capacity before buying.

What does the 6400MHz speed deliver once installed in the server?

The module runs at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V. Registered buffering lets every slot operate fully populated at rated speed while ECC corrects single-bit errors on the fly.

How does the 288-pin RDIMM interface limit what I can install?

The board requires 288-pin Registered DDR5 RDIMMs; UDIMM or SODIMM modules will not fit or function. The registered architecture offloads the memory controller so all slots can run fully populated.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。