نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 ECC UDIMM memory upgrade

SKU CH-Q9CC-7S66D

8GB DDR4 2133 ECC UDIMM module with CL15 timing and 1.2V operation for compatible workstations

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed supports responsive workstation performance
  • 2 V operation reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • CL15 latency delivers quick access for demanding applications

8GB DDR4 ECC UDIMM for workstations

This NEMIX RAM module delivers 8GB of DDR4 2133MHz memory with ECC error correction for data integrity. The unbuffered 288-pin UDIMM operates at 1.2V with CL15 latency. It is built using major OEM chips from Samsung, Micron or Hynix for server and workstation compatibility.

Standard voltage and no heat spreader

Running at the standard 1.20V DDR4 voltage, this module draws minimal power during normal operation. The absence of a heat spreader keeps the profile low for dense server chassis while relying on system airflow for cooling. No active cooling or additional power connectors are required.

ECC unbuffered UDIMM requirement

This part only works in systems that support DDR4 ECC unbuffered UDIMM memory. It will not function in platforms that require registered or load-reduced DIMMs, nor in non-ECC consumer motherboards that cannot use the error-correction feature.

أبرز المميزات

  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed supports responsive workstation performance
  • 2 V operation reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • CL15 latency delivers quick access for demanding applications

المواصفات

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC Unbuffered UDIMM
Part NumberME17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR4 2133MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN ECC Unbuffered UDIMM

أسئلة حول هذا المنتج

How do I install this 288-pin DDR4 UDIMM and what step is often missed?

Align the notch with the motherboard slot key, press firmly until both side clips click, then verify in BIOS that the module runs at 1.20 V and CL15.

What maintenance or replacement will this ECC UDIMM need over time?

No routine maintenance is required; if a correctable error count rises, replace the module to keep ECC protection active.

What limit appears first when this 2133 MHz memory runs under sustained load?

The CL15 latency at 1.20 V sets the throughput ceiling before thermal throttling becomes a factor.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.