NEMIX RAM
NEMIX RAM 8GB DDR4 2133 PC4-17000 ECC UDIMM memory upgrade
8GB DDR4 2133 ECC UDIMM module with CL15 timing and 1.2V operation for compatible workstations
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical workloads
- 2133 MHz DDR4 speed supports responsive workstation performance
- 2 V operation reduces power draw and heat
- 2Rx8 dual-rank layout increases memory density per slot
- CL15 latency delivers quick access for demanding applications
8GB DDR4 ECC UDIMM for workstations
This NEMIX RAM module delivers 8GB of DDR4 2133MHz memory with ECC error correction for data integrity. The unbuffered 288-pin UDIMM operates at 1.2V with CL15 latency. It is built using major OEM chips from Samsung, Micron or Hynix for server and workstation compatibility.
Standard voltage and no heat spreader
Running at the standard 1.20V DDR4 voltage, this module draws minimal power during normal operation. The absence of a heat spreader keeps the profile low for dense server chassis while relying on system airflow for cooling. No active cooling or additional power connectors are required.
ECC unbuffered UDIMM requirement
This part only works in systems that support DDR4 ECC unbuffered UDIMM memory. It will not function in platforms that require registered or load-reduced DIMMs, nor in non-ECC consumer motherboards that cannot use the error-correction feature.
Najważniejsze cechy
- ECC protection prevents data corruption in critical workloads
- 2133 MHz DDR4 speed supports responsive workstation performance
- 2 V operation reduces power draw and heat
- 2Rx8 dual-rank layout increases memory density per slot
- CL15 latency delivers quick access for demanding applications
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2133MHZ ECC Unbuffered UDIMM |
| Part Number | ME17000-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 2133MHZ ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN ECC Unbuffered UDIMM |
Pytania dotyczące tego produktu
How do I install this 288-pin DDR4 UDIMM and what step is often missed?
Align the notch with the motherboard slot key, press firmly until both side clips click, then verify in BIOS that the module runs at 1.20 V and CL15.
What maintenance or replacement will this ECC UDIMM need over time?
No routine maintenance is required; if a correctable error count rises, replace the module to keep ECC protection active.
What limit appears first when this 2133 MHz memory runs under sustained load?
The CL15 latency at 1.20 V sets the throughput ceiling before thermal throttling becomes a factor.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



