Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 ECC UDIMM memory upgrade

SKU CH-Q9CC-7S66D

8GB DDR4 2133 ECC UDIMM module with CL15 timing and 1.2V operation for compatible workstations

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed supports responsive workstation performance
  • 2 V operation reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • CL15 latency delivers quick access for demanding applications

8GB DDR4 ECC UDIMM for workstations

This NEMIX RAM module delivers 8GB of DDR4 2133MHz memory with ECC error correction for data integrity. The unbuffered 288-pin UDIMM operates at 1.2V with CL15 latency. It is built using major OEM chips from Samsung, Micron or Hynix for server and workstation compatibility.

Standard voltage and no heat spreader

Running at the standard 1.20V DDR4 voltage, this module draws minimal power during normal operation. The absence of a heat spreader keeps the profile low for dense server chassis while relying on system airflow for cooling. No active cooling or additional power connectors are required.

ECC unbuffered UDIMM requirement

This part only works in systems that support DDR4 ECC unbuffered UDIMM memory. It will not function in platforms that require registered or load-reduced DIMMs, nor in non-ECC consumer motherboards that cannot use the error-correction feature.

Přednosti

  • ECC protection prevents data corruption in critical workloads
  • 2133 MHz DDR4 speed supports responsive workstation performance
  • 2 V operation reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • CL15 latency delivers quick access for demanding applications

Specifikace

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ ECC Unbuffered UDIMM
Part NumberME17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR4 2133MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN ECC Unbuffered UDIMM

Otázky k tomuto produktu

How do I install this 288-pin DDR4 UDIMM and what step is often missed?

Align the notch with the motherboard slot key, press firmly until both side clips click, then verify in BIOS that the module runs at 1.20 V and CL15.

What maintenance or replacement will this ECC UDIMM need over time?

No routine maintenance is required; if a correctable error count rises, replace the module to keep ECC protection active.

What limit appears first when this 2133 MHz memory runs under sustained load?

The CL15 latency at 1.20 V sets the throughput ceiling before thermal throttling becomes a factor.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.