BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NShi
A desktop server chassis supplied with a 7.5V 80A 600W power supply featuring active PFC and full-load burn-in testing
This desktop server chassis includes a Mean Well HRP-600-7.5 single-output unit rated at 7.5V and 80A for 600W continuous power. It suits builders assembling compact rack or tower systems that need a regulated low-voltage rail. The integrated supply simplifies wiring by removing the need for a separate ATX brick. Buyers who need multiple voltage rails or higher wattage should look elsewhere.
The built-in supply uses active PFC and a constant-current limiting circuit to maintain stable output under load. A DC fan provides forced-air cooling while protections cover short circuit, overload, over voltage and over temperature. No-load draw stays below 0.75W and the unit withstands a 300VAC surge for five seconds. Remote sense and DC OK signal lines allow external monitoring.
The chassis adopts a 1U low-profile desktop layout that fits standard shallow racks or shelf mounts. Universal AC input accepts full-range mains without a voltage selector. Remote ON/OFF control and a 5V standby output let the host manage power state. Current sharing is available on 24V, 36V and 48V variants but not on this 7.5V model. Ensure your backplane and load cabling match the single 7.5V rail.
| Chassis Type | Desktop |
|---|
Mount the 1U low-profile unit in the chassis bay, secure it with screws, connect the AC input to a universal full-range source, and attach the DC output cables; the step often missed is wiring the remote sense terminals to the load for accurate voltage regulation.
The built-in DC fan draws dust into the enclosure; periodically vacuum the intake vents and verify the DC OK signal remains active, and after several years consider replacing the fan assembly if airflow drops.
The constant current limiting circuit engages at 80 A, capping output at 600 W; sustained operation at this level will trigger the over-temperature protection before any other limit is reached.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟