OEM Industries
OEM Industries JF0825S1M 80mm 12V 0.15A 2-wire CPU cooler
An 80 mm sleeve-bearing fan with orange LED runs on 12 V at 0.15 A via a two-wire connector
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeSleeve Bearing
- Power Connector2 Wires
- LEDOrange
- Efficient 12V cooling with low 0.15A draw
- Compact 80mm square frame fits tight chassis spaces
- Sleeve bearing runs quietly at reduced friction
- Two-wire power connector simplifies motherboard installation
- Orange LED adds subtle visual status indication
Compact 80 mm CPU fan for tight builds
This 80 mm square fan fits standard 8025 mounting holes and draws 0.15 A at 12 V. It is designed as a direct replacement cooler for small-form-factor systems or legacy sockets where larger towers cannot be installed.
Sleeve bearing and two-wire power lead
The sleeve bearing keeps running noise low at typical speeds while the two-wire connector supplies power without PWM control. Orange LED illumination adds a subtle glow visible through vented side panels.
Replaces worn 80 mm coolers in older chassis
Swapping out a rattling or failed 80 mm unit restores adequate airflow for low-TDP processors. The jump is worthwhile when the existing cooler has seized or when the original heatsink is retained and only the fan needs renewal.
أبرز المميزات
- Efficient 12V cooling with low 0.15A draw
- Compact 80mm square frame fits tight chassis spaces
- Sleeve bearing runs quietly at reduced friction
- Two-wire power connector simplifies motherboard installation
- Orange LED adds subtle visual status indication
المواصفات
| Model | JF0825S1M |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Sleeve Bearing |
| Power Connector | 2 Wires |
| LED | Orange |
أسئلة حول هذا المنتج
Does the 2-wire 12 V 0.15 A fan support PWM speed control?
The JF0825S1M uses a 2-wire connector supplying 12 V at 0.15 A, so it runs at fixed speed and cannot accept a PWM signal.
Will the 80 mm square frame with 25 mm thickness fit my existing 80 mm mounting holes?
Yes, the fan measures 80 mm by 80 mm with a 25 mm depth, matching the standard 80 mm square mounting pattern.
How do I connect the bare 2-wire leads to a motherboard 3-pin or 4-pin header?
Match the red lead to the 12 V pin and the black lead to ground; leave the tachometer pin empty, then secure the connector so it cannot shift onto adjacent pins.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



