暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 80mm cooling fan with orange LED and two wires

OEM Industries

OEM Industries JF0825S1M 80mm 12V 0.15A 2-wire CPU cooler

SKU CH-XXH9-51EAM

An 80 mm sleeve-bearing fan with orange LED runs on 12 V at 0.15 A via a two-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDOrange
  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

Compact 80 mm CPU fan for tight builds

This 80 mm square fan fits standard 8025 mounting holes and draws 0.15 A at 12 V. It is designed as a direct replacement cooler for small-form-factor systems or legacy sockets where larger towers cannot be installed.

Sleeve bearing and two-wire power lead

The sleeve bearing keeps running noise low at typical speeds while the two-wire connector supplies power without PWM control. Orange LED illumination adds a subtle glow visible through vented side panels.

Replaces worn 80 mm coolers in older chassis

Swapping out a rattling or failed 80 mm unit restores adequate airflow for low-TDP processors. The jump is worthwhile when the existing cooler has seized or when the original heatsink is retained and only the fan needs renewal.

特長

  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

仕様

ModelJF0825S1M
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDOrange

この商品に関する質問

Does the 2-wire 12 V 0.15 A fan support PWM speed control?

The JF0825S1M uses a 2-wire connector supplying 12 V at 0.15 A, so it runs at fixed speed and cannot accept a PWM signal.

Will the 80 mm square frame with 25 mm thickness fit my existing 80 mm mounting holes?

Yes, the fan measures 80 mm by 80 mm with a 25 mm depth, matching the standard 80 mm square mounting pattern.

How do I connect the bare 2-wire leads to a motherboard 3-pin or 4-pin header?

Match the red lead to the 12 V pin and the black lead to ground; leave the tachometer pin empty, then secure the connector so it cannot shift onto adjacent pins.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。