نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

OWC

OWC 32GB (4x8GB) DDR3 1866 CL13 ECC Registered RDIMM server RAM

SKU CH-EAQ4-1Y6ZV

Four 8 GB DDR3-1866 ECC registered RDIMMs totalling 32 GB for servers and workstations

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.5V
  • ECCYes

Rank 1Rx4

  • ECC registered design protects data integrity in servers
  • 1866 MHz DDR3 speed with CL13 latency supports responsive workloads
  • 32 GB quad-channel kit expands memory capacity for virtualization
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 240-pin registered DIMM form factor fits select workstations and servers

32 GB DDR3-1866 ECC Registered Kit

This OWC kit supplies 32 GB of DDR3 1866 registered ECC memory across four 8 GB modules. It uses 240-pin RDIMMs rated at PC3-14900 with CL13 latency and 1.5 V operation. The modules are unbuffered-rank 1Rx4 and carry no heat spreader. They are built for workstations, servers, NAS systems and routers that require registered ECC DDR3.

Suits registered-ECC DDR3 platforms.

Buyers maintaining or expanding servers, workstations or NAS units that accept 240-pin registered ECC DDR3 will find a direct JEDEC-compliant upgrade here. Systems that need unbuffered non-ECC memory, a different DDR generation, SODIMM form factor or higher speeds cannot use this kit. Mixing these registered modules with unbuffered DIMMS is also unsupported.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC RDIMM design with 1Rx4 rank structure. Only platforms explicitly qualified for 240-pin DDR3 1866 registered ECC memory at 1.5 V can accept this kit; all other memory controllers will reject it.

أبرز المميزات

  • ECC registered design protects data integrity in servers
  • 1866 MHz DDR3 speed with CL13 latency supports responsive workloads
  • 32 GB quad-channel kit expands memory capacity for virtualization
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 240-pin registered DIMM form factor fits select workstations and servers

المواصفات

BrandOWC
Part Number1R8D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I buy the 32GB kit as four 8GB modules or look for a different capacity?

This kit provides 32GB total across four 8GB modules, giving you four populated slots for maximum bandwidth on compatible platforms.

What does the 1866MHz speed mean for actual server workloads?

The modules run at DDR3 1866 (PC3-14900) with CL13 latency, delivering the rated throughput when the platform memory controller supports that frequency.

Will the 240-pin registered ECC interface work in my workstation?

These are 240-pin DDR3 ECC registered DIMMs at 1.5V; they require a workstation or server board that supports registered memory and cannot be mixed with unbuffered modules.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.