NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Pstaroth
Non-modular 2000 W ATX unit with 92 % efficiency, 16 PCIe 6+2-pin connectors and automatic 110-260 V input for eight-GPU mining rigs
This 2000W ATX power supply is built for cryptocurrency mining rigs that run up to eight graphics cards simultaneously. It delivers ultra-high power with a 92% conversion efficiency rating to reduce energy waste during continuous operation. The unit accepts a wide 110V-260V input range and automatically switches between voltages for global compatibility. It targets builders who need dense GPU power in a single non-modular package.
The supply uses a fixed non-modular harness with one 24-pin ATX, one 4+4-pin CPU, sixteen 6+2-pin PCIe, eight SATA and four large 4-pin connectors. Pure copper core wiring resists high temperatures and improves durability over long mining sessions. A dust cover shields internals from moisture and particulates in harsh environments. High-temperature protection activates automatically when internal heat exceeds 50 centigrade to prevent damage. A 165mm ball-bearing fan provides airflow through a protective grill.
Verify that your chassis can accommodate a non-modular cable bundle of this density and that airflow reaches the 165mm fan intake. Confirm your local mains voltage sits within the 110V-260V range and that 220V is available for loads above 1000W as recommended. Ensure the sixteen 6+2-pin PCIe leads match the exact power requirements of your specific graphics cards. This unit is not suited for builds needing modular cabling or lower maximum wattage.
| Type | ATX |
|---|---|
| Maximum Power | 2000 W |
| Modular | Non-Modular |
It follows ATX 12V 2.31, which defines the 24-pin, 4+4-pin and 6+2-pin current limits that let the unit feed eight graphics cards and a modern CPU simultaneously.
The case needs a standard ATX PSU bay, room for a 165 mm fan, and openings for one 20+4-pin, one 4+4-pin, sixteen 6+2-pin, eight SATA, four big 4-pin and three IDE plugs.
Mount the unit with its fan facing the airflow path, plug every required 6+2-pin and 4+4-pin lead directly into the GPUs and motherboard, and remember to switch the input to 220 V when the load exceeds 1000 W.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟