OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Replace Power
A 420W ATX power supply compatible with HP Media Center models, providing SATA and multiple peripheral connectors with switchable 110V or 220V input
This 420W ATX power supply replaces the original unit in HP Media Center models a1206n, m7077c, m7360n, a1430n, m8050br and m1082n. It fits standard ATX mounting points and uses a switchable 110V/220V input for worldwide mains compatibility. The grey enclosure houses a single cooling fan. It is built for owners of those specific HP desktops who need a direct swap.
The unit provides a 15-inch SATA connector, a 14-inch 20+4 pin ATX motherboard plug, a 14-inch 12V ATX plug, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector. Cable lengths range from 6 to 15 inches to reach drives and motherboard headers in typical mid-tower chassis. A single 80mm fan handles airflow. Builders working in very compact cases should verify clearances before ordering.
The 420W maximum output is the single figure that determines whether this unit can support your installed components. Add the rated draw of your CPU, graphics card, drives and expansion cards; if the total approaches or exceeds 420W, a higher-capacity supply is required. No other specification in the data overrides this limit.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-25 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies a 14-inch 20+4 pin ATX connector and a 14-inch 12V ATX connector for motherboard power.
The unit fits a standard ATX bay; the single 80mm fan exhausts at the rear and the grey casing matches typical mounting points.
Slide the 110V/220V switch to match your mains voltage, then secure the unit with four screws and attach the 20+4 pin, 12V, SATA and peripheral cables.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟