OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Samsung Canada
16 GB DDR3 1866 ECC registered DIMM with CL13 latency and 1.5 V operation
This Samsung M393B2G70DB0-CMA module provides 16GB of DDR3 server memory operating at 1866 MT/s with a CAS latency of CL13. It uses a 2Rx4 registered design with ECC Chipkill error correction and runs at the standard 1.5V. The single 240-pin DIMM is sold new without a heat spreader.
This module fits systems that require registered DIMMs with Chipkill ECC and a 2Rx4 organisation at the DDR3-1866 speed grade. It is not for platforms that accept only unbuffered non-ECC UDIMMs or that require a different DDR generation, voltage, pin count or rank configuration.
The registered buffer and Chipkill ECC are mandatory for compatible chipsets; unbuffered or standard ECC modules will not work in the same slots. Verify that your server specifies registered DDR3-1866 RDIMMs with a 2Rx4 layout before purchasing.
| Brand | SAMSUNG |
|---|---|
| Model | M393B2G70DB0-CMA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | ECC Chipkill |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
| وزن الشحنة | 0.23 kg |
| أبعاد الطرد | 229 × 152 × 25 mm |
The module operates at the standard DDR3 voltage of 1.50 V and the rated speed of 1866 MHz; registered DIMMs of this class typically draw a few watts per stick and run warm but within normal server thermal limits.
A 240-pin DDR3 DIMM slot that supports registered ECC memory is required; the board must accept 2Rx4 modules and provide the PC3-14900 data rate.
Mixing ranks is generally supported on server platforms that qualify 2Rx4 modules; the memory controller will address each rank independently at the common 1866 MHz speed.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟