نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Steel mounting bracket with SATA data and power cable for 2.5 to 3.5 drive bay

STARTECH

STARTECH BRACKET25SAT 2.5 to 3.5 SATA SSD accessory

SKU CH-PVMP-48FSJ MPN BRACKET25SAT

Mounts a 2.5" SATA drive into a 3.5" bay with included 22-pin SATA and LP4 power cable and steel bracket

  • Protection CaseSingle Drive
  • SpecificationsIncludes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA C
  • FeaturesMount a 2.5in SATA hard drive to any computer with an availa

Model 1 x 2.5in (SATA)

Option 1 x 3.5in

  • Mount a 2.5in SATA drive in any 3.5in bay with the included bracket
  • Boost desktop speed by adding a fast 2.5in SSD to a standard 3.5in slot
  • Install quickly using the supplied 22-pin SATA+Power to 7-pin SATA and 4-pin LP4 adapter cable
  • Built from solid steel for a secure, vibration-resistant fit
  • Works with popular 2.5in SSDs such as Samsung 840 EVO and Crucial MX 100 series

2.5 to 3.5 SATA Drive Mounting Kit

The BRACKET25SAT lets you install a 2.5in SATA hard drive or SSD into a standard 3.5in drive bay. It is built for desktop users who want to add faster solid-state storage without replacing their case. The steel bracket fits drives such as the Samsung 840 EVO or Crucial MX 100 series. No tool-less mechanism is included; screws are supplied.

Included 22-pin SATA-to-LP4 Adapter Cable

The kit ships with a combined 22-pin SATA data and power cable that splits to a 7-pin SATA connector and a 4-pin LP4 Molex plug. This single cable carries both signals, so you do not need separate data and power leads. An optional IDE4044 adapter can extend support to 2.5in IDE drives if required.

Steel Bracket with Standard Bay Alignment

The bracket uses solid steel construction measuring .4in high by 3.9in wide by 3.9in long and weighs 3.88 oz. Mounting holes align with common 3.5in bay spacing, allowing a secure fit in most desktop chassis. The supplied screw kit fastens both the drive to the bracket and the bracket to the case.

أبرز المميزات

  • Mount a 2.5in SATA drive in any 3.5in bay with the included bracket
  • Boost desktop speed by adding a fast 2.5in SSD to a standard 3.5in slot
  • Install quickly using the supplied 22-pin SATA+Power to 7-pin SATA and 4-pin LP4 adapter cable
  • Built from solid steel for a secure, vibration-resistant fit
  • Works with popular 2.5in SSDs such as Samsung 840 EVO and Crucial MX 100 series

المواصفات

BrandStarTech.com
ModelBRACKET25SAT
Protection CaseSingle Drive
SpecificationsIncludes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
FeaturesMount a 2.5in SATA hard drive to any computer with an available 3.5in bay. This Serial ATA hard drive mounting kit allows you to install a 2.5in SATA hard drive in a 3.5in drive bay.
The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable - which helps simplify installation and reduce clutter within the computer case.
وزن الشحنة0.91 kg
أبعاد الطرد305 × 254 × 203 mm

إصدارات أخرى من هذا الطراز

4 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the included LP4 power connector need replacing over time?

The bracket includes a combined 22-pin SATA data and power cable that splits to a 7-pin SATA connector and a 4-pin LP4 Molex connector; no separate LP4 replacement is required unless the cable itself is damaged.

What limits how many drives I can stack in one 3.5-inch bay?

The bracket is a single-drive mount measuring .4 inch high, 3.9 inches wide and 3.9 inches long, so only one 2.5-inch SATA drive fits per bracket and per 3.5-inch bay.

Does the steel bracket get hot or add fan noise when the SSD runs all day?

The solid steel construction acts as a passive heatsink for the 2.5-inch drive; it has no moving parts, draws no power itself and adds no audible noise.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.