STARTECH BRACKET 3.5" to 5.25" Drive Adapter Bracket ssd accessory
- Black
- 1 x 3.5" Drive to 5…
STARTECH
Mounts a 2.5" SATA drive into a 3.5" bay with included 22-pin SATA and LP4 power cable and steel bracket
Model 1 x 2.5in (SATA)
Option 1 x 3.5in
The BRACKET25SAT lets you install a 2.5in SATA hard drive or SSD into a standard 3.5in drive bay. It is built for desktop users who want to add faster solid-state storage without replacing their case. The steel bracket fits drives such as the Samsung 840 EVO or Crucial MX 100 series. No tool-less mechanism is included; screws are supplied.
The kit ships with a combined 22-pin SATA data and power cable that splits to a 7-pin SATA connector and a 4-pin LP4 Molex plug. This single cable carries both signals, so you do not need separate data and power leads. An optional IDE4044 adapter can extend support to 2.5in IDE drives if required.
The bracket uses solid steel construction measuring .4in high by 3.9in wide by 3.9in long and weighs 3.88 oz. Mounting holes align with common 3.5in bay spacing, allowing a secure fit in most desktop chassis. The supplied screw kit fastens both the drive to the bracket and the bracket to the case.
| Brand | StarTech.com |
|---|---|
| Model | BRACKET25SAT |
| Protection Case | Single Drive |
| Specifications | Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable Connectors 1x SATA 7 pin Female Connector Connectors 1x SATA 15 pin Female Connector Connectors 1x LP4 Male Connector |
| Features | Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay. This Serial ATA hard drive mounting kit allows you to install a 2.5in SATA hard drive in a 3.5in drive bay. The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable - which helps simplify installation and reduce clutter within the computer case. |
| 배송 무게 | 0.91 kg |
| 포장 크기 | 305 × 254 × 203 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The bracket includes a combined 22-pin SATA data and power cable that splits to a 7-pin SATA connector and a 4-pin LP4 Molex connector; no separate LP4 replacement is required unless the cable itself is damaged.
The bracket is a single-drive mount measuring .4 inch high, 3.9 inches wide and 3.9 inches long, so only one 2.5-inch SATA drive fits per bracket and per 3.5-inch bay.
The solid steel construction acts as a passive heatsink for the 2.5-inch drive; it has no moving parts, draws no power itself and adds no audible noise.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?