저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black metal bracket holding two 2.5 inch drives in a 3.5 inch bay

STARTECH

STARTECH BRACKET225PT Dual 2.5" to 3.5" HDD/SSD Mounting Bracket

SKU CH-J9EF-0EP5Z MPN BRACKET225PT

Mounts two 2.5 inch SATA drives in one 3.5 inch bay with tool-free installation

  • ColorBlack
  • Conversion Tray2 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5"

Model 2 x 2.5in (Tool-less)

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

Option 1 x 3.5in

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

Dual 2.5″ to 3.5″ drive bracket

The StarTech BRACKET225PT adapter fits two 2.5″ SATA solid-state drives or hard drives into a single 3.5″ bay. It accepts drives from 5 mm to 12.5 mm thick and uses a tool-free design for quick installation. The bracket is intended for desktop builders who need extra storage without sacrificing an additional bay.

SATA I/II/III interface limits

Data transfer speed is bound by the SATA revision supported by the drive and the host controller. The bracket itself adds no protocol overhead but cannot exceed the bandwidth of the slowest link in the chain. Builders using older SATA I ports will see reduced throughput compared with SATA III connections.

Check bay clearance and drive height

Verify that the chassis has a free 3.5″ bay with enough depth for the bracket and both drives. Confirm each 2.5″ drive measures between 5 mm and 12.5 mm in height; thicker drives will not fit. Ensure the motherboard or controller provides two SATA data ports and the power supply has two SATA power connectors.

주요 특징

  • Install two drives in one 3.5" bay
  • Tool-free bracket installs without extra hardware
  • Fits 2.5" drives from 5 mm to 12.5 mm thick
  • Works with SATA I, II and III drives
  • Black metal frame protects both drives inside the bay

사양

BrandStarTech.com
ModelBRACKET225PT
ColorBlack
Conversion Tray2 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5"
SpecificationsCompatible Drive Types (Type and Rate): SATA & IDE
Drive Installation: Fixed
Drive Size: 2.5in
Number of 2.5 inch bays 2
Supported Drive Height(s):
5mm
7mm
9.5mm
12.5mm
FeaturesInstall two 2.5” solid-state drives or hard drives into a single 3.5” bay in a desktop computer
Tool-free 2-drive adapter bracket
2-bay 2.5" to 3.5" SATA SSD/HDD Converter Adapter
Supports 2.5in drives 5mm to 12.5 mm in height
SATA I/II/III
배송 무게0.09 kg
포장 크기142 × 107 × 36 mm

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I pick the single or dual version of this bracket?

The BRACKET225PT is the dual version and holds two 2.5in drives in one 3.5in bay.

What does the tool-less design mean when I fit it in my PC?

You can slide each 2.5in drive into the bracket and secure it without screws, then mount the bracket in the 3.5in bay.

The bracket lists SATA I/II/III — what speed will my drives actually run at?

The bracket passes through the native SATA link so each drive runs at its own rated SATA I, II or III speed.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.