نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Blue 2.85 mm PLA filament spool, 1 kg

Taulman 3D

Taulman 3D In-PLA Filament 2.85 mm 1 kg Blue 3D printers accessory

SKU CH-W5CC-5SBMQ

Blue 2.85 mm PLA filament on a 1 kg spool prints at 217–222 °C with 70 °C bed temperature

  • ColorBlue
  • TypeFilament
  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

Filament Diameter 2.85 mm

This Taulman 3D In-PLA filament comes in a 1 kg spool of blue material sized at 2.85 mm. It is formulated for higher tensile strength and elongation than standard PLA, with a tensile value of 5,043 PSI and elongation of 497 %. The industrial-grade polymer prints at 217–222 °C with a bed temperature of 70 °C and offers improved colour clarity for collectibles, figurines, phone cases and functional enclosures.

Makers Seeking Stronger PLA

The material suits hobbyists and professionals who want PLA-like ease of printing but need better mechanical and thermal stress resistance for architectural models, wearable items or electronic housings. It is less appropriate for users whose printers cannot reach the specified nozzle or bed temperatures, or for projects that demand a different polymer chemistry such as high-temperature resins.

Print Temperature 217–222 °C

The decisive specification is the nozzle temperature window of 217–222 °C paired with a 70 °C heated bed; if your printer cannot reliably maintain these temperatures the filament will not perform as intended. Buyers should verify that their hardware supports this range before purchasing.

أبرز المميزات

  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

المواصفات

Brandtaulman3d
ColorBlue
TypeFilament

أسئلة حول هذا المنتج

Will the 2.85 mm filament feed correctly on my older printer that takes 3 mm spools?

Yes, 2.85 mm is the standard diameter for printers specified as 3 mm, so it will feed without hardware changes.

How can I confirm the In-PLA is printing at the right temperature after setup?

Print a temperature tower between 217C and 222C; the layer with the cleanest overhangs and strongest layer bonding shows the optimal setting.

Does the 1 kg spool include a desiccant pack or must I buy one separately?

The box contains only the sealed 1 kg Blue In-PLA spool; desiccant packs and any dry-box storage are sold separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.