暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue 2.85 mm PLA filament spool, 1 kg

Taulman 3D

Taulman 3D In-PLA Filament 2.85 mm 1 kg Blue 3D printers accessory

SKU CH-W5CC-5SBMQ

Blue 2.85 mm PLA filament on a 1 kg spool prints at 217–222 °C with 70 °C bed temperature

  • ColorBlue
  • TypeFilament
  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

Filament Diameter 2.85 mm

This Taulman 3D In-PLA filament comes in a 1 kg spool of blue material sized at 2.85 mm. It is formulated for higher tensile strength and elongation than standard PLA, with a tensile value of 5,043 PSI and elongation of 497 %. The industrial-grade polymer prints at 217–222 °C with a bed temperature of 70 °C and offers improved colour clarity for collectibles, figurines, phone cases and functional enclosures.

Makers Seeking Stronger PLA

The material suits hobbyists and professionals who want PLA-like ease of printing but need better mechanical and thermal stress resistance for architectural models, wearable items or electronic housings. It is less appropriate for users whose printers cannot reach the specified nozzle or bed temperatures, or for projects that demand a different polymer chemistry such as high-temperature resins.

Print Temperature 217–222 °C

The decisive specification is the nozzle temperature window of 217–222 °C paired with a 70 °C heated bed; if your printer cannot reliably maintain these temperatures the filament will not perform as intended. Buyers should verify that their hardware supports this range before purchasing.

特長

  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

仕様

Brandtaulman3d
ColorBlue
TypeFilament

この商品に関する質問

Will the 2.85 mm filament feed correctly on my older printer that takes 3 mm spools?

Yes, 2.85 mm is the standard diameter for printers specified as 3 mm, so it will feed without hardware changes.

How can I confirm the In-PLA is printing at the right temperature after setup?

Print a temperature tower between 217C and 222C; the layer with the cleanest overhangs and strongest layer bonding shows the optimal setting.

Does the 1 kg spool include a desiccant pack or must I buy one separately?

The box contains only the sealed 1 kg Blue In-PLA spool; desiccant packs and any dry-box storage are sold separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。