我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Blue 2.85 mm PLA filament spool, 1 kg

Taulman 3D

Taulman 3D In-PLA Filament 2.85 mm 1 kg Blue 3D printers accessory

SKU CH-W5CC-5SBMQ

Blue 2.85 mm PLA filament on a 1 kg spool prints at 217–222 °C with 70 °C bed temperature

  • ColorBlue
  • TypeFilament
  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

Filament Diameter 2.85 mm

This Taulman 3D In-PLA filament comes in a 1 kg spool of blue material sized at 2.85 mm. It is formulated for higher tensile strength and elongation than standard PLA, with a tensile value of 5,043 PSI and elongation of 497 %. The industrial-grade polymer prints at 217–222 °C with a bed temperature of 70 °C and offers improved colour clarity for collectibles, figurines, phone cases and functional enclosures.

Makers Seeking Stronger PLA

The material suits hobbyists and professionals who want PLA-like ease of printing but need better mechanical and thermal stress resistance for architectural models, wearable items or electronic housings. It is less appropriate for users whose printers cannot reach the specified nozzle or bed temperatures, or for projects that demand a different polymer chemistry such as high-temperature resins.

Print Temperature 217–222 °C

The decisive specification is the nozzle temperature window of 217–222 °C paired with a 70 °C heated bed; if your printer cannot reliably maintain these temperatures the filament will not perform as intended. Buyers should verify that their hardware supports this range before purchasing.

商品特色

  • Stronger prints with 10,000 psi tensile strength
  • Clear, vivid blue colour without yellow tint
  • Withstands mechanical and thermal stress in use
  • Ideal for collectibles, figurines and phone cases
  • Prints at 217–222 °C with 70 °C bed

商品規格

Brandtaulman3d
ColorBlue
TypeFilament

商品問答

Will the 2.85 mm filament feed correctly on my older printer that takes 3 mm spools?

Yes, 2.85 mm is the standard diameter for printers specified as 3 mm, so it will feed without hardware changes.

How can I confirm the In-PLA is printing at the right temperature after setup?

Print a temperature tower between 217C and 222C; the layer with the cleanest overhangs and strongest layer bonding shows the optimal setting.

Does the 1 kg spool include a desiccant pack or must I buy one separately?

The box contains only the sealed 1 kg Blue In-PLA spool; desiccant packs and any dry-box storage are sold separately.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。